Fake Oakleys
#26
Senior Member
Join Date: May 2011
Location: Cherry Hill, NJ
Posts: 367
Bikes: 2014 Boardman SLS 9.4 Di2, 2011 CAAD 10 4
Likes: 0
Liked 0 Times
in
0 Posts
I bought these Smith & Wesson shooting glasses for $6.99. I haven't been out at night with them yet, but they should be good.
https://www.quill.com/smith-wesson-ma..._PLA_CB_252145
https://www.quill.com/smith-wesson-ma..._PLA_CB_252145
#27
Port
Join Date: Jan 2008
Location: Boston
Posts: 6,844
Bikes: 2022 Soma Fog Cutter, 2021 Calfee Draqonfly 44, 1984 Peter Mooney, 2017 Soma Stanyan, 1990 Fuji Ace, 1990 Bridgestone RB-1, 1995 Independent Fabrications Track, 2003 Calfee Dragonfly Pro
Liked 2,220 Times
in
1,209 Posts
Buy some clear replacement lenses for your Flak Jacket on ebay. Clear, non OEM lenses are <$20. Or buy some cheapo clear safety glasses at the local big box store.
__________________
https://rowdml.tripod.com/panmass
https://rowdml.tripod.com/panmass
#29
Senior Member
#30
King Hoternot
Join Date: Jun 2010
Location: Oregon City, OR
Posts: 5,255
Bikes: 2015 Cannondale Evo Hi mod
Likes: 0
Liked 0 Times
in
0 Posts
#35
Senior Member
Join Date: Jul 2012
Posts: 148
Likes: 0
Liked 0 Times
in
0 Posts
I work in the optical business in the United States and let me offer some professional advice....(For the record, I do not work for Oakley)
-Impact resistance with cycling is extremely important for obvious reasons. "Real" Oakley lenses are made of Lexan/Polycarbonate which is the most impact resistant material available for ophthalmic lenses. Fake Oakleys typically use an acetate or CR39 plastic material which explodes upon impact. Also, the frames that Oakley makes are also designed to withstand damage during crashes or impact. The frames themselves are not made of polycarbonate, but they are made of a zylo/plastic material that will keep you safe during a crash. Oakley hinges, temples and bezels are designed with impact resistance in mind. On a cheaper frame, the bezel may be made slightly rounded or smaller which doesn't keep the lens in place during impact. The result is that if the lens miraculously doesn't shatter, it will dislodge straight back towards your eye and cause serious damage to your Cornea.
-Safety Frames and Shooting Frames do indeed peform well for cycling. These sorts of frames are stamped "Z87-2" on the temples and the lenses typically are marked with a PS+ near the temporal edge. These markings designate that they pass the FDA's impact resistance testing for industrial safety of high velocity projectiles. The only drawbacks to these cheaper alternatives is many don't have anti-fogging or anti-reflective coatings on them. Also the lenses are typically "stamped" which is more prone to aberrations versus Oakley lenses which are surfaced using traditional manufacturing methods and have far less birefringence than stamped lenses.
-Coating technology may look the same on fakes in terms of the residual color in the reflective, front-side mirror coating, but the coating stack is not the same. Most Oakley coatings are 10 layers, each side, including a more scratch resistant base hard-coating. The hard coating will be less prone to hairline and deep scratches. Also, the top coat on most Oakley coatings is made of oleo-phobic materials which repels dirt, oil and moisture, making the lenses much easier to clean while out riding. Some Oakley lenses feature an anti-fog, oleo-phobic top coat which prevents the lenses from steaming up when you stop at traffic lights.
Sorry to go full-on lens nerd on this board, but when I read these sorts of comments on here I just had to offer some facts. Comparing fake Oakleys to real ones is similar to comparing a Cervelo to a Huffy.
-Impact resistance with cycling is extremely important for obvious reasons. "Real" Oakley lenses are made of Lexan/Polycarbonate which is the most impact resistant material available for ophthalmic lenses. Fake Oakleys typically use an acetate or CR39 plastic material which explodes upon impact. Also, the frames that Oakley makes are also designed to withstand damage during crashes or impact. The frames themselves are not made of polycarbonate, but they are made of a zylo/plastic material that will keep you safe during a crash. Oakley hinges, temples and bezels are designed with impact resistance in mind. On a cheaper frame, the bezel may be made slightly rounded or smaller which doesn't keep the lens in place during impact. The result is that if the lens miraculously doesn't shatter, it will dislodge straight back towards your eye and cause serious damage to your Cornea.
-Safety Frames and Shooting Frames do indeed peform well for cycling. These sorts of frames are stamped "Z87-2" on the temples and the lenses typically are marked with a PS+ near the temporal edge. These markings designate that they pass the FDA's impact resistance testing for industrial safety of high velocity projectiles. The only drawbacks to these cheaper alternatives is many don't have anti-fogging or anti-reflective coatings on them. Also the lenses are typically "stamped" which is more prone to aberrations versus Oakley lenses which are surfaced using traditional manufacturing methods and have far less birefringence than stamped lenses.
-Coating technology may look the same on fakes in terms of the residual color in the reflective, front-side mirror coating, but the coating stack is not the same. Most Oakley coatings are 10 layers, each side, including a more scratch resistant base hard-coating. The hard coating will be less prone to hairline and deep scratches. Also, the top coat on most Oakley coatings is made of oleo-phobic materials which repels dirt, oil and moisture, making the lenses much easier to clean while out riding. Some Oakley lenses feature an anti-fog, oleo-phobic top coat which prevents the lenses from steaming up when you stop at traffic lights.
Sorry to go full-on lens nerd on this board, but when I read these sorts of comments on here I just had to offer some facts. Comparing fake Oakleys to real ones is similar to comparing a Cervelo to a Huffy.
Last edited by Lazy Dog; 10-11-12 at 12:21 PM.
#36
Senior Member
Join Date: Aug 2004
Location: SO-CAL
Posts: 851
Bikes: Litespeed Teramo, Argon 18 Road, Fuji Mt Fuji Pro MTB, Fuji Track Pro FG, & Cannondale Quick CX Cross
Likes: 0
Liked 1 Time
in
1 Post
I got the fake red and white Radars from a Taiwanese seller on flea bay last year, honestly I was very disappointed with fit and quality. They r sitting in a drawer..unused, not even once.
Next day I bit the bullet and ordered the real ones. There it goes $40 to trash can.
Next day I bit the bullet and ordered the real ones. There it goes $40 to trash can.
#37
Senior Member
Join Date: Jul 2012
Posts: 148
Likes: 0
Liked 0 Times
in
0 Posts
The other thing is....
Lots of fake products you can buy direct from China, like Nike products, actually come from Nike's China-based manufacturing facilities. They are surplus goods that are smuggled out or allowed to be sold and the chances are that the product you get here in the States is very similar to the real, over-priced version you buy at Foot Locker. With Oakley products, they produce most of them in Tustin, California at their US headquarters. They are made here so it's nearly impossible for the fake Oakleys to be surplus authentic Oakley product.
Lots of fake products you can buy direct from China, like Nike products, actually come from Nike's China-based manufacturing facilities. They are surplus goods that are smuggled out or allowed to be sold and the chances are that the product you get here in the States is very similar to the real, over-priced version you buy at Foot Locker. With Oakley products, they produce most of them in Tustin, California at their US headquarters. They are made here so it's nearly impossible for the fake Oakleys to be surplus authentic Oakley product.
#38
Senior Member
Join Date: Aug 2009
Posts: 111
Likes: 0
Liked 0 Times
in
0 Posts
#39
King Hoternot
Join Date: Jun 2010
Location: Oregon City, OR
Posts: 5,255
Bikes: 2015 Cannondale Evo Hi mod
Likes: 0
Liked 0 Times
in
0 Posts
I feel the need to say that even though I show ioffer as an option, I personally dont wear fake ones. the fit and quality not is not as good. If you are looking for something that is inexpensive though, I see it as a good option. I am to vain to wear fake ones.
#43
I don't know if this was brought up or not (I haven't read each reply) but being FLAK Jackets, can't you just buy the replacement lens of your choice for about $40? And if you know someone in Law Enforcement or Military, they can probably get them for half that for you. I've had my Half Jackets for 7 years I think, and they are still going strong. I have bought various lenses over the years but the frames are doing fine.
#47
I work in the optical business in the United States and let me offer some professional advice....(For the record, I do not work for Oakley)
-Impact resistance with cycling is extremely important for obvious reasons. "Real" Oakley lenses are made of Lexan/Polycarbonate which is the most impact resistant material available for ophthalmic lenses. Fake Oakleys typically use an acetate or CR39 plastic material which explodes upon impact. Also, the frames that Oakley makes are also designed to withstand damage during crashes or impact. The frames themselves are not made of polycarbonate, but they are made of a zylo/plastic material that will keep you safe during a crash. Oakley hinges, temples and bezels are designed with impact resistance in mind. On a cheaper frame, the bezel may be made slightly rounded or smaller which doesn't keep the lens in place during impact. The result is that if the lens miraculously doesn't shatter, it will dislodge straight back towards your eye and cause serious damage to your Cornea.
-Safety Frames and Shooting Frames do indeed peform well for cycling. These sorts of frames are stamped "Z87-2" on the temples and the lenses typically are marked with a PS+ near the temporal edge. These markings designate that they pass the FDA's impact resistance testing for industrial safety of high velocity projectiles. The only drawbacks to these cheaper alternatives is many don't have anti-fogging or anti-reflective coatings on them. Also the lenses are typically "stamped" which is more prone to aberrations versus Oakley lenses which are surfaced using traditional manufacturing methods and have far less birefringence than stamped lenses.
-Coating technology may look the same on fakes in terms of the residual color in the reflective, front-side mirror coating, but the coating stack is not the same. Most Oakley coatings are 10 layers, each side, including a more scratch resistant base hard-coating. The hard coating will be less prone to hairline and deep scratches. Also, the top coat on most Oakley coatings is made of oleo-phobic materials which repels dirt, oil and moisture, making the lenses much easier to clean while out riding. Some Oakley lenses feature an anti-fog, oleo-phobic top coat which prevents the lenses from steaming up when you stop at traffic lights.
Sorry to go full-on lens nerd on this board, but when I read these sorts of comments on here I just had to offer some facts. Comparing fake Oakleys to real ones is similar to comparing a Cervelo to a Huffy.
-Impact resistance with cycling is extremely important for obvious reasons. "Real" Oakley lenses are made of Lexan/Polycarbonate which is the most impact resistant material available for ophthalmic lenses. Fake Oakleys typically use an acetate or CR39 plastic material which explodes upon impact. Also, the frames that Oakley makes are also designed to withstand damage during crashes or impact. The frames themselves are not made of polycarbonate, but they are made of a zylo/plastic material that will keep you safe during a crash. Oakley hinges, temples and bezels are designed with impact resistance in mind. On a cheaper frame, the bezel may be made slightly rounded or smaller which doesn't keep the lens in place during impact. The result is that if the lens miraculously doesn't shatter, it will dislodge straight back towards your eye and cause serious damage to your Cornea.
-Safety Frames and Shooting Frames do indeed peform well for cycling. These sorts of frames are stamped "Z87-2" on the temples and the lenses typically are marked with a PS+ near the temporal edge. These markings designate that they pass the FDA's impact resistance testing for industrial safety of high velocity projectiles. The only drawbacks to these cheaper alternatives is many don't have anti-fogging or anti-reflective coatings on them. Also the lenses are typically "stamped" which is more prone to aberrations versus Oakley lenses which are surfaced using traditional manufacturing methods and have far less birefringence than stamped lenses.
-Coating technology may look the same on fakes in terms of the residual color in the reflective, front-side mirror coating, but the coating stack is not the same. Most Oakley coatings are 10 layers, each side, including a more scratch resistant base hard-coating. The hard coating will be less prone to hairline and deep scratches. Also, the top coat on most Oakley coatings is made of oleo-phobic materials which repels dirt, oil and moisture, making the lenses much easier to clean while out riding. Some Oakley lenses feature an anti-fog, oleo-phobic top coat which prevents the lenses from steaming up when you stop at traffic lights.
Sorry to go full-on lens nerd on this board, but when I read these sorts of comments on here I just had to offer some facts. Comparing fake Oakleys to real ones is similar to comparing a Cervelo to a Huffy.
#48
Senior Member
Join Date: Jun 2009
Location: Boone, North Carolina
Posts: 5,094
Bikes: 2009 Cannondale CAAD9-6 2014 Trek Domaine 5.9
Likes: 0
Liked 0 Times
in
0 Posts
#49
Senior Member
Join Date: Sep 2010
Location: Albany, NY
Posts: 437
Bikes: 80's Treks, cargo bike, Lugged LeMond, Eddy Merckx 7-11, Ciocc resto-mod, All City MM disc, and some more
Likes: 0
Liked 0 Times
in
0 Posts
Not true... who would enforce such a law? Not that you have specified any particular section of law. There are no federal police. Federal law enforcement has very specific purposes. Even under Federal law the infringement is undertaken by those involved in the manufacture, sale, or distribution of those items... not by someone who possesses them.
Cops sworn at the state or local level cannot enforce federal law. They can enforce NYS Penal Law which under Article 165 does provide for prosecution of those involved in sale, manufacture, or distribution of counterfeit goods. Federal law enforcers can enforce state laws when the state has granted them those powers, but without a law to enforce they too would be without any luck.
I'm not encouraging anyone to buy counterfeit goods or to argue with you, but my initial statement stands... at least in NY.
Cops sworn at the state or local level cannot enforce federal law. They can enforce NYS Penal Law which under Article 165 does provide for prosecution of those involved in sale, manufacture, or distribution of counterfeit goods. Federal law enforcers can enforce state laws when the state has granted them those powers, but without a law to enforce they too would be without any luck.
I'm not encouraging anyone to buy counterfeit goods or to argue with you, but my initial statement stands... at least in NY.