Installed my clipless pedals today... Cleat wear?
#1
Texas Tornado
Thread Starter
Join Date: Aug 2013
Location: Texas
Posts: 278
Bikes: '14 Specialized Roubaix SL 4 Full Ultegra 6800
Likes: 0
Liked 0 Times
in
0 Posts
Installed my clipless pedals today... Cleat wear?
Put some Shimano 105s on my Allez, attached and centered the cleats on the shoe, and did an EASY 7 miles. I mean wow. The hills were cake, my average speed went from around 14 to 17-18 mph, and best of all I didn't fall, even in traffic. Love it.
My question is: I'm trying my best to not touch the asphalt with the cleats to reduce wear, but already there is some scuffing on the back of the cleats. 1) Is that normal? 2) Better to have the wear on the back of the cleat as opposed to the front, right?
If you're on the fence about clipless pedals, GO GET SOME! Night and day.
My question is: I'm trying my best to not touch the asphalt with the cleats to reduce wear, but already there is some scuffing on the back of the cleats. 1) Is that normal? 2) Better to have the wear on the back of the cleat as opposed to the front, right?
If you're on the fence about clipless pedals, GO GET SOME! Night and day.
#2
It's normal. Cleat life depends in large part on how often they touch the ground.
#3
got the climbing bug
Join Date: Jan 2005
Location: San Diego
Posts: 10,215
Bikes: one for everything
Liked 935 Times
in
282 Posts
it is normal to touch the asphalt, biggest wear will be from dragging your foot as you come up to a red light. But I'd rather drag the cleats ($25) oppose to dragging the heal of the roadie shoes ($200+) Minimize foot/pavement drag and cleats should last a yr or so.
__________________
Rule #10 // It never gets easier, you just go faster.
Rule #10 // It never gets easier, you just go faster.
#6
Senior Member
Join Date: May 2011
Location: Brodhead, WI - south of Madison
Posts: 2,928
Bikes: 2009 Trek 1.2
Likes: 0
Liked 3 Times
in
1 Post
I wouldn't say "essential" ... but sure, they'll help if you walk a lot in them.
That said, I've got Shimano Ultegra SPD-SLs and my current cleats are going on three years. They'll be replaced over the winter, but if you take care of them you'll get plenty of life out of htem.
Scuffing is normal. Just check your cleat bolts from time to time to make sure they're snug (someone is bound to chime in with a story about a fall because of a cleat that was loose).
That said, I've got Shimano Ultegra SPD-SLs and my current cleats are going on three years. They'll be replaced over the winter, but if you take care of them you'll get plenty of life out of htem.
Scuffing is normal. Just check your cleat bolts from time to time to make sure they're snug (someone is bound to chime in with a story about a fall because of a cleat that was loose).
#7
Senior Member
I plan on replacing my cleats each spring and saving a pair that is "decent" for times I realize I need to get some for whatever reason.
#8
Shredding Grandma!
Join Date: Jun 2006
Location: So Cal
Posts: 4,803
Bikes: I don't own any bikes
Likes: 0
Liked 1 Time
in
1 Post
BTW you will be surprised how worn and scuff up a cleat can get and still function properly. Generally I don't replace cleats until I replace the shoes...
__________________
______________________________________________________________
Private docent led mountain bike rides through Limestone Canyon. Go to letsgooutside.org and register today! Also available: hikes, equestrian rides and family events as well as trail maintenance and science study.
______________________________________________________________
Private docent led mountain bike rides through Limestone Canyon. Go to letsgooutside.org and register today! Also available: hikes, equestrian rides and family events as well as trail maintenance and science study.
#10
Senior Member
#11
got the climbing bug
Join Date: Jan 2005
Location: San Diego
Posts: 10,215
Bikes: one for everything
Liked 935 Times
in
282 Posts
I never liked the covers. Just one more thing to carry in my pockets with my food n phone. No thanks. Just walk like a duck and your shoes will have a nice clacking sound in the stores
__________________
Rule #10 // It never gets easier, you just go faster.
Rule #10 // It never gets easier, you just go faster.
#12
Senior Member
Join Date: Oct 2012
Posts: 204
Likes: 0
Liked 0 Times
in
0 Posts
I try to use cleat covers with my SPD-SL cleats as well. I used those shoes during RAGBRAI and had to stop and walk in towns fairly often and they were getting pretty scuffed up. However, if you look at the contact points with the pedal, you'll see that it takes quiet a long time for those to get to a point where they are wearing down. Some other guys in my group were using the same cleats and there's were worn much worse than mine and they were still riding fine (I think one guy had worn one of the yellow blocks on the back completely off!)
#13
Senior Member
Join Date: Oct 2011
Location: Ellensburg,WA
Posts: 3,210
Bikes: Schwinn Broadway, Specialized Secteur Sport(crashed) Spec. Roubaix Sport, Spec. Crux
Liked 183 Times
in
94 Posts
I tried cleat covers with my Look KEO cleats. One would stay on one would not. I gave up trying to use them. I now use Speedplay pedals and the cleats cost even more. Nothing lasts forever other than the mean things folks write on the web.......Replace cleats as needed.
__________________
Sir Mark, Knight of Sufferlandria
Sir Mark, Knight of Sufferlandria
#14
Starting over
Join Date: Jun 2005
Location: Indianapolis
Posts: 4,077
Bikes: 1990 Trek 1500; 2006 Gary Fisher Marlin; 2011 Cannondale Synapse Alloy 105; 2012 Catrike Trail
Likes: 0
Liked 3 Times
in
3 Posts
I tried cleat covers with my Look KEO cleats. One would stay on one would not. I gave up trying to use them. I now use Speedplay pedals and the cleats cost even more. Nothing lasts forever other than the mean things folks write on the web.......Replace cleats as needed.
#15
Just Plain Slow
Join Date: Mar 2010
Location: Santa Clarita, CA
Posts: 6,026
Bikes: Lynskey R230
Likes: 0
Liked 5 Times
in
5 Posts
I use SPD pedals/cleats (mountain bike). I'm on the same cleats I bought in '97. Now,granted, I took many years off from riding, but I am truly impressed with how long they've lasted. Howver, the design is very different. The cleats are more protected in SPD-type shoes than SPD-SL or other road cleat methods.
#16
Senior Member
Join Date: Oct 2011
Location: Ellensburg,WA
Posts: 3,210
Bikes: Schwinn Broadway, Specialized Secteur Sport(crashed) Spec. Roubaix Sport, Spec. Crux
Liked 183 Times
in
94 Posts
Have you looked into Keep-On-Kovers for the Speedplays? I've been real happy with them.
__________________
Sir Mark, Knight of Sufferlandria
Sir Mark, Knight of Sufferlandria
#17
just pedal
I use SPD pedals/cleats (mountain bike). I'm on the same cleats I bought in '97. Now,granted, I took many years off from riding, but I am truly impressed with how long they've lasted. Howver, the design is very different. The cleats are more protected in SPD-type shoes than SPD-SL or other road cleat methods.
as mentioned SPD with either touring or MTB shoes will recess the cleat so you are walking on the sole of the shoe instead of a hard metal cleat...
#18
Senior Member
Have you looked into Keep-On-Kovers for the Speedplays? I've been real happy with them.
__________________
2010 Kestrel RT900SL, 800k carbon, chorus/record, speedplay, zonda
2000 litespeed Unicoi Ti, XTR,XT, Campy crank, time atac, carbon forks
2010 Kestrel RT900SL, 800k carbon, chorus/record, speedplay, zonda
2000 litespeed Unicoi Ti, XTR,XT, Campy crank, time atac, carbon forks
#20
Starting over
Join Date: Jun 2005
Location: Indianapolis
Posts: 4,077
Bikes: 1990 Trek 1500; 2006 Gary Fisher Marlin; 2011 Cannondale Synapse Alloy 105; 2012 Catrike Trail
Likes: 0
Liked 3 Times
in
3 Posts
Yes, they stay on, by intent. They don't interfere with clipping in or out. And I haven't had one come off inadvertently while off the bike, either.
#21
Jockey Full Of Bourbon
Join Date: Sep 2013
Location: Southwest Ontario
Posts: 127
Bikes: Merckx Mourenx '69 with full Dura Ace, 1996 Merckx MX-Leader Campy Record 10 speed, Merckx EMX-5 ex-Etixx team bike with Campag Record 11 speed. Pinarello F4:13 with Campag Record 10 speed, New Merckx Liege 75 unbuilt, '86 Merckx Corsa Extra unbuilt.
Likes: 0
Liked 0 Times
in
0 Posts
I haven't ever used cleat covers since I first bought a pair of Look pedals in 1987. The cleats wear on the backside from walking but you're not supposed to go on a hike with them, just put your shoes on right before you hop on the bike and take them off soon after. Don't walk from the house to the garage in your cycling shoes, put your cycling shoes on in the garage. Get a pair of soccer slides or cycling slides or hockey slides if that helps. If you have to drive to ride, get your bike off the rack, kit up, load your water bottles, stretch, then put your cycling shoes on. Doing this and riding 3 or 4 days a week, my cleats will last 2,000 miles or so. The important part of a Look cleat is the part that engages once you're snapped in, and that will wear in time as the cleat floats against the pedal-- more important wear than the bottom of the cleat.
I could see cleat covers if you're trodding around in your cycling shoes or you want to stop and have a cuppa during the ride.
PS
Tile+cleats = deadly. There are more really slippery combinations and you'll figure that out, hopefully by not breaking your arse.
I could see cleat covers if you're trodding around in your cycling shoes or you want to stop and have a cuppa during the ride.
PS
Tile+cleats = deadly. There are more really slippery combinations and you'll figure that out, hopefully by not breaking your arse.
#22
Senior Member
I find the leave on covers for my speedplay light actions to be helpful when I stop for a red light.
I dont slide when I put my foot down, and they give me some traction when I push off.
SCHLUG I bring plenty of tools and patches w/me when I ride solo, but I have on 2 occasions needed to walk from a unforeseen breakdown to my nearest lbs/support location. Its was after the first one that I got my covers. Have you never had to face the walk of shame??
I dont slide when I put my foot down, and they give me some traction when I push off.
SCHLUG I bring plenty of tools and patches w/me when I ride solo, but I have on 2 occasions needed to walk from a unforeseen breakdown to my nearest lbs/support location. Its was after the first one that I got my covers. Have you never had to face the walk of shame??
__________________
2010 Kestrel RT900SL, 800k carbon, chorus/record, speedplay, zonda
2000 litespeed Unicoi Ti, XTR,XT, Campy crank, time atac, carbon forks
2010 Kestrel RT900SL, 800k carbon, chorus/record, speedplay, zonda
2000 litespeed Unicoi Ti, XTR,XT, Campy crank, time atac, carbon forks
#23
Jockey Full Of Bourbon
Join Date: Sep 2013
Location: Southwest Ontario
Posts: 127
Bikes: Merckx Mourenx '69 with full Dura Ace, 1996 Merckx MX-Leader Campy Record 10 speed, Merckx EMX-5 ex-Etixx team bike with Campag Record 11 speed. Pinarello F4:13 with Campag Record 10 speed, New Merckx Liege 75 unbuilt, '86 Merckx Corsa Extra unbuilt.
Likes: 0
Liked 0 Times
in
0 Posts
I have to say in all my years of cycling I have never had to make the walk of shame. I can recall having to use someone's phone in Texas (in the 80's) to have my local bike shop come fetch me and once in Donegal waiting for my mate to come back while I enjoyed the scenery. Could be stuck in worse places.