Today I (v2):
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,670
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Liked 2,600 Times
in
1,593 Posts
Today I said "Bye Felicia" to winter and installed the Naches Passes on the fixed-gear:
42mm of cushy goodness!
[MENTION=362748]SquidPuppet[/MENTION]
42mm of cushy goodness!
[MENTION=362748]SquidPuppet[/MENTION]
Calamari Marionette Ph.D
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,670
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Liked 2,600 Times
in
1,593 Posts
First off, it always makes me happy to see tan sidewalls on my bike again. Secondly, cushy tires mess with my head every time! The Nokian Mount & Grounds that I spent about 650 miles on this year are the complete opposite of supple, and add a ton of "buzz" due to the studs. So the NPs felt a little draggy at first, with the instinctual look down to make sure they hadn't gone flat. The fact that I switched from winter gearing (59") to summer gearing (71") at the same time is probably part of it. But as I did my 27-mile ride yesterday, I gradually stopped noticing them, and had no trouble keeping up with anyone in the group.
I did notice that my NDS crank was glancing off the chainstay, which was odd. This set of Sugino GLPs on a 104mm bottom bracket has always had minimal clearance, but I'm not sure what changed. Maybe I knocked the bike over to the left side some time ago, and didn't notice until I had smooth tires? A few swipes with a flat file, and I've bought myself a little more time until I have to figure out a solution that won't throw off my chainline...
I did notice that my NDS crank was glancing off the chainstay, which was odd. This set of Sugino GLPs on a 104mm bottom bracket has always had minimal clearance, but I'm not sure what changed. Maybe I knocked the bike over to the left side some time ago, and didn't notice until I had smooth tires? A few swipes with a flat file, and I've bought myself a little more time until I have to figure out a solution that won't throw off my chainline...
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,670
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Liked 2,600 Times
in
1,593 Posts
Senior Member
This weekend I completed the 2018 PA Fleche on the "Sinister Nuts" team. It was 5 guys on fixed gear bikes. Four of us are around 60 and the kid was 47.
https://ridewithgps.com/trips/22366990
Great time riding through the night.
Ride Safe,
Joe
https://ridewithgps.com/trips/22366990
Great time riding through the night.
Ride Safe,
Joe
Calamari Marionette Ph.D
- Soli Deo Gloria -
Join Date: Aug 2015
Location: Northwest Georgia
Posts: 14,779
Bikes: 2018 Rodriguez Custom Fixed Gear, 2017 Niner RLT 9 RDO, 2015 Bianchi Pista, 2002 Fuji Robaix
Liked 738 Times
in
469 Posts
Jobst Brandt said, "The Alenax is a great example of an outsider inventing a solution to a perceived problem, creating something that is useless for the intended user. Much money was thrown into the design and manufacture of the Alenax, and several years of bicycle-show attendance with many models. As soon as you ride it, you'll realize why it doesn't work."
So, how did it work for you? What was your impression?
And where was this thing that you got to ride it?
So, how did it work for you? What was your impression?
And where was this thing that you got to ride it?
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,670
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Liked 2,600 Times
in
1,593 Posts
Jobst Brandt said, "The Alenax is a great example of an outsider inventing a solution to a perceived problem, creating something that is useless for the intended user. Much money was thrown into the design and manufacture of the Alenax, and several years of bicycle-show attendance with many models. As soon as you ride it, you'll realize why it doesn't work."
So, how did it work for you? What was your impression?
And where was this thing that you got to ride it?
So, how did it work for you? What was your impression?
And where was this thing that you got to ride it?
Yes, and yes! The first time I put a leg over it, I chickened out and had to think about it a little more, because I was sure I'd crash before I figured out the motion. Once I got a few more treadle-strokes in, it started to make sense and I took longer and longer excursions up and down the block.
Shifting is interesting -- there are four speeds, and you use a friction shifter to adjust where the ends of the chain catch on the levers. If the shift cables aren't perfectly adjusted, it's easy to end up in a situation where one treadle is one gear higher than the other.
Although he didn't say it outright, I wonder if some of Jobst's vehement opposition was due to concern that riding one of these things would get in the way of learning how to ride a regular bike if the person was new to it, or if spending time on the Alenax would "de-train" someone from regular bike muscle memory, at their peril.
I thought it was fun by the end -- I want my brother to bring it on club rides to mess with people.
Calamari Marionette Ph.D
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,670
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Liked 2,600 Times
in
1,593 Posts
It's a weird feeling. This bike was "almost" perfectly adjusted, but each shift was a "clunk-clunk" where the resistance was temporarily different for each leg. Supposedly, the fact that the two treadles could be set to different resistances was billed as a feature for folks with physical impairments. [citation needed]
Super-duper Genius
Today I figured out the creaking noise while pedaling my fixed gear. Turns out it was slightly loose pedals, not the crank. It is usually something other than the crank. Had the bb tool, crank puller, and torque wrench all ready to go.. Fixed in 2 seconds with an Allen wrench
- Soli Deo Gloria -
Join Date: Aug 2015
Location: Northwest Georgia
Posts: 14,779
Bikes: 2018 Rodriguez Custom Fixed Gear, 2017 Niner RLT 9 RDO, 2015 Bianchi Pista, 2002 Fuji Robaix
Liked 738 Times
in
469 Posts
Today I hit 2000 miles and about 87,000 feet climbing for the year.
Last edited by TimothyH; 04-25-18 at 10:39 PM.
Senior Member
Join Date: Sep 2009
Location: PHL
Posts: 9,948
Bikes: Litespeed Catalyst, IRO Rob Roy, All City Big Block
Liked 400 Times
in
196 Posts
Nice. I'm almost to 1000 miles and just over 54k feet of climbing so far. I intended on being a lot further along but life had other plans.
Senior Member
Join Date: Feb 2014
Location: SD
Posts: 2,745
Bikes: Handsome Fredward, Trek 1.1
Liked 131 Times
in
47 Posts
I'm happy because I eliminated the BB creak on my Steamroller.
Senior Member
Join Date: Sep 2014
Location: Gainesville, FL
Posts: 408
Bikes: 2015 Aventon Diamond
Likes: 0
Liked 2 Times
in
2 Posts
Quiet riding is so much nicer! My stem creak is gone as well and it is a lot better riding.
Senior Member
Join Date: Feb 2014
Location: SD
Posts: 2,745
Bikes: Handsome Fredward, Trek 1.1
Liked 131 Times
in
47 Posts
Calamari Marionette Ph.D
Senior Member
Join Date: Feb 2014
Location: SD
Posts: 2,745
Bikes: Handsome Fredward, Trek 1.1
Liked 131 Times
in
47 Posts
Swapped out the Phil BB I had originally used on my last Steamroller for a generic one. I never had problems with it in my previous 'roller but every since I took it out of that frame I've haven't been able to get it to run quiet. My previous Steamroller had a different Phil BB in it when it was stolen and that one had no issues. The one I took out yesterday made noise in both of my new bikes I've tried it in. The crank tapers showed some slight gouging from the end of the spindle but it's working well now. Not sure what was going on.
Silver Comet Trail Georgia - Welcome