How many hours a week do you spend tinkering on your bike?
#1
How many hours a week do you spend tinkering on your bike?
How many hours a week do you spend tinkering on your bike(s)? Just curious. I have 2013 Giant Talon I just bought last month . I ride it about 18 miles a day as a road bike and I've become quite fond of it. I spend an average of 8 hours a week on it, rebuilding the forks , bleeding brakes , testing tires...someday it will be just the way I want it and no more tinkering? Don't think so
#2
How many hours a week do you spend tinkering on your bike?
How many hours a week do you spend tinkering on your bike(s)? Just curious. I have 2013 Giant Talon I just bought last month . I ride it about 18 miles a day as a road bike and I've become quite fond of it. I spend an average of 8 hours a week on it, rebuilding the forks , bleeding brakes , testing tires...someday it will be just the way I want it and no more tinkering? Don't think so
Likes For 5 mph:
Likes For Bigbus:
#4
Roughly once a week I'll check the tires on all of the bikes in the garage, and look for any other signs of trouble. I might add a drop of oil here or there if needed, or tend to a noisy chain. I've spent more time, when I'm actively building a new bike or making some major change, but that's pretty rare.
#5
Senior Member
I spend a lot of time probably an hour a day at least. I have several bikes and am always doing something ....upgradeing components trying different geometry and different pannier racks . Spent one evening setting up tubeless then 9 days later spent an evening putting tubes back in and cleaning up tire sealant . I prefer tinkering over tv.
I dont want to hijack this thread but what is fake rust (post 2 I think)
I dont want to hijack this thread but what is fake rust (post 2 I think)
#8
tcarl
Too many. But I'm overhauling old wheels and doing restoration work on old bikes right now, so I have projects to work on above and beyond routine maintenance.
#9
Senior Member
Join Date: Feb 2012
Location: Golden, CO and Tucson, AZ
Posts: 2,902
Bikes: 2012 Specialized Elite Disc, 1983 Trek 520
Liked 837 Times
in
466 Posts
You're in the honeymoon period. The last bike I got was my first with disk brakes and I tinkered with them a couple of hours. Now I just ride it and fix what's needed. About 35 years ago I got my first indexed shifting system it was fun tinkering with that.
I spent way too much time tinkering with cantilever brakes, too many hours per year for over twenty years. I'm glad those days are over.
I get enough tinkering by volunteering at non-profit bike shops and coops. I still tinker with cantis too much, but at least I don't live with them.
I spent way too much time tinkering with cantilever brakes, too many hours per year for over twenty years. I'm glad those days are over.
I get enough tinkering by volunteering at non-profit bike shops and coops. I still tinker with cantis too much, but at least I don't live with them.
#10
Before old age and breathing problems got I would clean my chain off of the bike every 800 miles and check and adjust, replace any part as needed. Every 2500 miles or so I would overhaul the hubs and check the wheels for true.
#11
Senior Member
How many hours a week do you spend tinkering on your bike(s)? Just curious. I have 2013 Giant Talon I just bought last month . I ride it about 18 miles a day as a road bike and I've become quite fond of it. I spend an average of 8 hours a week on it, rebuilding the forks , bleeding brakes , testing tires...someday it will be just the way I want it and no more tinkering? Don't think so
I probably spend a few hours a week (average) on bike maintenance and repairs, but then I have five bikes and ride them 800-900 miles a month at this time of year.
#12
Banned
Join Date: Apr 2010
Location: Lincoln Ne
Posts: 9,924
Bikes: RANS Stratus TerraTrike Tour II
Liked 1,057 Times
in
636 Posts
I live in the snow belt, and I do a good cleaning and recon job on my bikes then. It pretty much precluded any problems during the riding season. The only time I spend during riding season is wiping down the chain before every ride, and topping off the tires.
#13
Off grid off road
As I am just rediscovering the joy of bikes and cycling, I’d say about eight hours a day just at the moment
#14
Senior Member
Join Date: Apr 2010
Location: Mountain View, CA USA and Golden, CO USA
Posts: 6,341
Bikes: 97 Litespeed, 50-39-30x13-26 10 cogs, Campagnolo Ultrashift, retroreflective rims on SON28/PowerTap hubs
Liked 326 Times
in
226 Posts
Less than 0.1 on average. I inflate my tires weekly, lubricate my chain when it doesn't run silently which could be 800 miles after replacement or after 100 miles in a rainy week, replace my rear shift cable plus housing every 2000 miles (every 10-20 weeks), replace one tire every 4500 miles (every 10-25 weeks), replace my chain every 4500 miles (every 10-25 weeks), and do other things less frequently.
I adjust brake pads when they squeak, replace bar tape after it tears in a few years, and replace brake hoods when they get too many holes less frequently.
I got 25,000 miles out of my last rear shifter, and will get over 25,000 miles out of my current cassette.
Bicycles are simple machines that work well with minimal maintenance.
I adjust brake pads when they squeak, replace bar tape after it tears in a few years, and replace brake hoods when they get too many holes less frequently.
I got 25,000 miles out of my last rear shifter, and will get over 25,000 miles out of my current cassette.
Bicycles are simple machines that work well with minimal maintenance.
Last edited by Drew Eckhardt; 08-09-20 at 12:11 PM.
#15
Full Member
Probably less than an hour a week for the 3 bikes use. Ride them around 18-20 hours a week though.
#16
Senior Member
Join Date: Sep 2009
Location: Up
Posts: 4,695
Bikes: Masi, Giant TCR, Eisentraut (retired), Jamis Aurora Elite, Zullo, Cannondale, 84 & 93 Stumpjumpers, Waterford, Tern D8, Bianchi, Gunner Roadie, Serotta, Serotta Duette, was gifted a Diamond Back
Liked 2,038 Times
in
604 Posts
I just get a bee in my bonnet and think something may work better on one bike or another. I spend about 2-3 hours a week working on bikes.
I am getting a different frame soon and will be switching everything over from an old frame that I cracked. I will spend about 5 or 6 hours switching the parts and getting everything dialed in.
I am getting a different frame soon and will be switching everything over from an old frame that I cracked. I will spend about 5 or 6 hours switching the parts and getting everything dialed in.
#17
Forum Moderator
Join Date: Jul 2007
Location: Kalamazoo MI
Posts: 21,171
Bikes: Fuji SL2.1 Carbon Di2 Cannondale Synapse Alloy Viscount Aerospace Pro Raleigh C50 Cromoly Hybrid Legnano Tipo Roma Pista
Liked 7,514 Times
in
4,198 Posts
Duplicate threads merged.
#18
I think some of it is my affection for my bike...the times its stayed up when I hit a branch or veered into a ditch or an unexpected obstacle on the side of the road... bicycles, unlike cars, are an extension of your body...somedays you feel like you and your bike are one soul... that being said, so was our last dog... but I dont think the bike will be sleeping between me and my better half...