Tire pressure
#26
Senior Member
Play with the numbers in the tire pressure calculator - not every input is created equal. Tire width makes a giant difference. Many other things do not.
Also, for what its worth, I use a DeWalt battery-powered air compressor to pump up my bike. I can set a pressure and forget it while the pump does all the work. Because the pump has a screen and a light, I can even do this in the dark and without glasses. Handy piece of equipment.
Also, for what its worth, I use a DeWalt battery-powered air compressor to pump up my bike. I can set a pressure and forget it while the pump does all the work. Because the pump has a screen and a light, I can even do this in the dark and without glasses. Handy piece of equipment.
Likes For ScottCommutes:
#27
Mad bike riding scientist
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,514
Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones
Liked 4,340 Times
in
2,435 Posts
Additionally, rider input and technique factor into the equation. Everyone seems to want to ride a bike as if it is damned sofa…with their posterior planted firmly on the saddle and then wondering why the bike rides so “hard”. Riding a bike is more like riding a horse. You don’t plant yourself in the saddle unless you want a very uncomfortable ride. Legs and arms provide suspension on a rigid bike (and on a suspended bike) and they do so to a larger degree than a relatively tiny air filled bladder.
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Likes For cyccommute:
#28
Mad bike riding scientist
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,514
Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones
Liked 4,340 Times
in
2,435 Posts
It’s not black and white
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Likes For cyccommute:
#29
Quantify “slow”. 50% slower? 75% “slower”? Or more like 1% slower? This article from Schwalbe would suggest the latter. They compare a 37mm tire to a 60 mm tire and there is about a 10 watt difference in rolling resistance. That translates into about 1 kph of speed change. And an argument can be made that the 60mm tire results in a higher loss of speed than that due to the increased air resistance as well as the increased power needs to roll the extra mass down the road.
It’s not black and white
It’s not black and white
Of course the speed differences are marginal, but the ride quality isn’t.
Likes For PeteHski:
#30
Perceptual Dullard
But higher pressures, besides making for a harsh ride, shrink the contact patch, decreasing traction, and increasing the chances of skidding or losing control. FWIW, I worked for some time the motorcycle division of the Pirelli tire company, and understand a little bit about the subject.
Hmmm.
Likes For RChung:
#31
Banned
Join Date: Feb 2008
Location: Mississauga/Toronto, Ontario canada
Posts: 8,721
Bikes: I have 3 singlespeed/fixed gear bikes
Liked 2,492 Times
in
1,287 Posts
When it comes to tire pressures, I just go by feel, it has never failed me yet.
Likes For wolfchild:
#32
Senior Member
Join Date: May 2022
Location: USA - Southwest PA
Posts: 3,331
Bikes: Cannondale - Gary Fisher - Giant - Litespeed - Schwinn Paramount - Schwinn (lugged steel) - Trek OCLV
Liked 2,147 Times
in
1,198 Posts
Play with the numbers in the tire pressure calculator - not every input is created equal. Tire width makes a giant difference. Many other things do not.
Also, for what its worth, I use a DeWalt battery-powered air compressor to pump up my bike. I can set a pressure and forget it while the pump does all the work. Because the pump has a screen and a light, I can even do this in the dark and without glasses. Handy piece of equipment.
Also, for what its worth, I use a DeWalt battery-powered air compressor to pump up my bike. I can set a pressure and forget it while the pump does all the work. Because the pump has a screen and a light, I can even do this in the dark and without glasses. Handy piece of equipment.
use it for bike and car / truck tires
have a few bike floor pumps - including two Silca pumps - and now only use them to partially inflate a tube before install
also have a small compressor - but have not used it in some time (especially since my father borrowed it and still has it)
#33
Senior Member
Join Date: Oct 2014
Location: Portland, OR
Posts: 13,056
Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder
Liked 4,085 Times
in
2,642 Posts
Tire pressure is all about trial and error. Different tires and tires sizes react differently at different pressures. This is very easy to experiment with, as your tires will gradually deflate after you fill them up to the labeled pressure. In time you can find that sweet spot where you get a good combination of comfort and rolling resistance. When it feels right, check the tire pressure, and stick with that pressure.
Something you can do. That tire, the Zaffiro, is a mediocre tire. Better tires can 1) handle (usually) more pressure and 2) roll far better at all pressures, including higher pressures. You could run a 28c Rubino at 100 front, 105 rear and you'd be pleased. Spend the money for the 28c Corsa G at that pressure or higher and come back from rides with a huge smile on your face. (And 120 psi in a Corsa G won't phase it at all. I never would because I don't want my teeth knocked out at that pressure on that big a tire (I'm light) but I would have zero worry about that tire blowing at that pressure as long as I trusted the bead/rim (hook?) interface and my mounting skills.)
(I'm saying this for clincher tires, not tubeless. That's a whole new game I have not played. And I have had so-called "very good" tires blow off rims after real care adjusting the beads to be even. I now stay away from Challenge clinchers and stick with Vittoria.)
Likes For 79pmooney:
#34
old newbie
Thread Starter
Join Date: Nov 2009
Location: Fort Worth, Texas
Posts: 960
Bikes: Specialized Roubaix
Liked 410 Times
in
211 Posts
But - and sometimes a rather important "but" - if that sweet spot takes your pressure down to where you might pinch flat going down one of your faster hills, the consequences after the crash from trying to ride on a bare rim or the tire coming off and jamming in the stays/fork can be large. In racing terms as spelled out by several mentors of mine - any gains must be balanced out with the loss of conditioning that happens after crash injuries that you cannot ride through. This applies also to pushing more pressure than the tire or rim can handle.
Something you can do. That tire, the Zaffiro, is a mediocre tire. Better tires can 1) handle (usually) more pressure and 2) roll far better at all pressures, including higher pressures. You could run a 28c Rubino at 100 front, 105 rear and you'd be pleased. Spend the money for the 28c Corsa G at that pressure or higher and come back from rides with a huge smile on your face. (And 120 psi in a Corsa G won't phase it at all. I never would because I don't want my teeth knocked out at that pressure on that big a tire (I'm light) but I would have zero worry about that tire blowing at that pressure as long as I trusted the bead/rim (hook?) interface and my mounting skills.)
(I'm saying this for clincher tires, not tubeless. That's a whole new game I have not played. And I have had so-called "very good" tires blow off rims after real care adjusting the beads to be even. I now stay away from Challenge clinchers and stick with Vittoria.)
Something you can do. That tire, the Zaffiro, is a mediocre tire. Better tires can 1) handle (usually) more pressure and 2) roll far better at all pressures, including higher pressures. You could run a 28c Rubino at 100 front, 105 rear and you'd be pleased. Spend the money for the 28c Corsa G at that pressure or higher and come back from rides with a huge smile on your face. (And 120 psi in a Corsa G won't phase it at all. I never would because I don't want my teeth knocked out at that pressure on that big a tire (I'm light) but I would have zero worry about that tire blowing at that pressure as long as I trusted the bead/rim (hook?) interface and my mounting skills.)
(I'm saying this for clincher tires, not tubeless. That's a whole new game I have not played. And I have had so-called "very good" tires blow off rims after real care adjusting the beads to be even. I now stay away from Challenge clinchers and stick with Vittoria.)
For the riding I am doing right now mine are fine.
#35
Senior Member
Join Date: Dec 2020
Location: Wake Forest, NC
Posts: 6,060
Bikes: 1989 Cinelli Supercorsa
Liked 3,107 Times
in
1,875 Posts
I go for max pressure.
#36
climber has-been
Join Date: Dec 2004
Location: Palo Alto, CA
Posts: 7,345
Bikes: Scott Addict R1, Felt Z1
Liked 3,818 Times
in
1,902 Posts
#37
Senior Member
Join Date: Jul 2009
Posts: 6,197
Bikes: Colnago, Van Dessel, Factor, Cervelo, Ritchey
Liked 7,772 Times
in
3,110 Posts
Likes For tomato coupe:
#39
Banned
Join Date: Feb 2008
Location: Mississauga/Toronto, Ontario canada
Posts: 8,721
Bikes: I have 3 singlespeed/fixed gear bikes
Liked 2,492 Times
in
1,287 Posts
#40
climber has-been
Join Date: Dec 2004
Location: Palo Alto, CA
Posts: 7,345
Bikes: Scott Addict R1, Felt Z1
Liked 3,818 Times
in
1,902 Posts
So I assume that pressure by feel has "always worked for [you]" means that you have a tolerance for different pressures.
#41
old newbie
Thread Starter
Join Date: Nov 2009
Location: Fort Worth, Texas
Posts: 960
Bikes: Specialized Roubaix
Liked 410 Times
in
211 Posts
I aired my tires to 85psi front and 90psi rear. Honestly that’s where they were and I just left them alone. I didn’t really feel a difference from when I aired them higher a while ago.
I have come to the conclusion that for me I prefer to have air inside the tube. It rides much smoother and is a lot quieter. I’m going to keep it this way.
I have come to the conclusion that for me I prefer to have air inside the tube. It rides much smoother and is a lot quieter. I’m going to keep it this way.
Likes For pepperbelly:
#42
#43
Banned
Join Date: Feb 2008
Location: Mississauga/Toronto, Ontario canada
Posts: 8,721
Bikes: I have 3 singlespeed/fixed gear bikes
Liked 2,492 Times
in
1,287 Posts
Likes For eightzero:
#45
Veteran, Pacifist
Join Date: Dec 2004
Location: Seattle area
Posts: 13,445
Bikes: Bikes??? Thought this was social media?!?
Liked 4,984 Times
in
2,293 Posts
![](https://cimg0.ibsrv.net/gimg/bikeforums.net-vbulletin/1200x630/a_7787794_0_1c184a2c5489331dd0232eca61b52e558a8fea73.jpg)
whether it's right or no.....
__________________
Vintage, modern, e-road. It is a big cycling universe.
Vintage, modern, e-road. It is a big cycling universe.
#46
Senior Member
Join Date: Dec 2020
Location: Wake Forest, NC
Posts: 6,060
Bikes: 1989 Cinelli Supercorsa
Liked 3,107 Times
in
1,875 Posts
Likes For smd4:
Likes For pepperbelly:
#48
Veteran, Pacifist
Join Date: Dec 2004
Location: Seattle area
Posts: 13,445
Bikes: Bikes??? Thought this was social media?!?
Liked 4,984 Times
in
2,293 Posts
Tire Pressure?
This is the Way
This is the Way
![](https://cimg4.ibsrv.net/gimg/bikeforums.net-vbulletin/1280x960/a_teddy_bears_hugging_1b3fe8c91b195a607ef3e692f6ebf5913516a9c4.jpg)
__________________
Vintage, modern, e-road. It is a big cycling universe.
Vintage, modern, e-road. It is a big cycling universe.
#49
Senior Member
Join Date: Jul 2006
Location: San Jose (Willow Glen) Ca
Posts: 10,056
Bikes: Kirk Custom JK Special, '84 Team Miyata,(dura ace old school) 80?? SR Semi-Pro 600 Arabesque
Liked 3,054 Times
in
1,646 Posts
One thing that is not noted it that accuracy of the psi gauges on pumps vary wildly.
it is a good idea to get a quality pressure gauge to check what the actual is.
complete luxury but I use a Milwaukee batter powered inflator, added a silca chuck. make this it all super easy and accurate (checked with a good gauge)
I like the rene herse calculator https://www.renehersecycles.com/tire...culator-intro/
it is a good idea to get a quality pressure gauge to check what the actual is.
complete luxury but I use a Milwaukee batter powered inflator, added a silca chuck. make this it all super easy and accurate (checked with a good gauge)
I like the rene herse calculator https://www.renehersecycles.com/tire...culator-intro/
__________________
Life is too short not to ride the best bike you have, as much as you can.
Life is too short not to ride the best bike you have, as much as you can.
#50
old newbie
Thread Starter
Join Date: Nov 2009
Location: Fort Worth, Texas
Posts: 960
Bikes: Specialized Roubaix
Liked 410 Times
in
211 Posts
One thing that is not noted it that accuracy of the psi gauges on pumps vary wildly.
it is a good idea to get a quality pressure gauge to check what the actual is.
complete luxury but I use a Milwaukee batter powered inflator, added a silca chuck. make this it all super easy and accurate (checked with a good gauge)
I like the rene herse calculator https://www.renehersecycles.com/tire...culator-intro/
it is a good idea to get a quality pressure gauge to check what the actual is.
complete luxury but I use a Milwaukee batter powered inflator, added a silca chuck. make this it all super easy and accurate (checked with a good gauge)
I like the rene herse calculator https://www.renehersecycles.com/tire...culator-intro/