Trek Multitrack 750 1994 rebuild help
#1
Trek Multitrack 750 1994 rebuild help
I'm rebuilding this bike, so far I have replaced the tires, seat, all cables, kick stand, shifters, break handles, and breaks.
I replaced the old break handles and shifters with a shimano combo break shift unit
I want to replace the front and rear derailleurs, not sure what to buy, front derailleur seems simple, clamp style, and tub dia. range, with number of gears, the rear, I'm not so sure about. My question is what is the difference between the mountain bike version and road bike version? I have a 3x7 gear set, seems similar to MB.
I seem to have some problems tuning up the rear shifter, it down ****s into higher gears easily, but likes to skip gears in up shifts into lower gears, is it possible that the new index shifter is not compatible to the rear cassette. To get in the gear I want, I shift past, the drop down.
I don't have a lot of experience rebuilding bikes, but I'm a Mechanical Engineer, and red a little, and watched a few Utubes.
Any help in picking the proper derailleurs is appreciated, or any other advice.
I replaced the old break handles and shifters with a shimano combo break shift unit
I want to replace the front and rear derailleurs, not sure what to buy, front derailleur seems simple, clamp style, and tub dia. range, with number of gears, the rear, I'm not so sure about. My question is what is the difference between the mountain bike version and road bike version? I have a 3x7 gear set, seems similar to MB.
I seem to have some problems tuning up the rear shifter, it down ****s into higher gears easily, but likes to skip gears in up shifts into lower gears, is it possible that the new index shifter is not compatible to the rear cassette. To get in the gear I want, I shift past, the drop down.
I don't have a lot of experience rebuilding bikes, but I'm a Mechanical Engineer, and red a little, and watched a few Utubes.
Any help in picking the proper derailleurs is appreciated, or any other advice.
Likes For martin18152:
#2
Senior Member
All 7 speed Shimano (3 or 7 speed) MTB or Road dérailleurs should work. My 520 is similar to your 750 and uses a bottom pull 28.6 clamp front dérailleur (M650). I can't guarantee your frame is the same clamp size, but look for Deore LX, DX or XT components. XTR is the highest, but the most expensive.
Which shifters did you add? Is the cable attachment point to the dérailleur correct? If both the shifters and cassette are 7 speed, it should be compatible.
Photos would be helpful.
Which shifters did you add? Is the cable attachment point to the dérailleur correct? If both the shifters and cassette are 7 speed, it should be compatible.
Photos would be helpful.
#3
Senior Member
Join Date: Mar 2015
Location: New Zealand
Posts: 1,058
Bikes: Gunnar, Shogun, Concorde, F Moser, Pete Tansley, Rocky Mtn, Diamant, Krapf, Marin, Avanti, Winora, Emmelle, Ken Evans
Liked 419 Times
in
219 Posts
https://www.sheldonbrown.com/derailer-adjustment.html
you might find this helpful
A new rear mech is probably not necessary, but if you really want one then RD-M310 is probably the one.
good luck dude
you might find this helpful
A new rear mech is probably not necessary, but if you really want one then RD-M310 is probably the one.
good luck dude
#4
Senior Member
Subscribing.
Needs more pictures please.
Needs more pictures please.
#5
Thanks
thanks for your replies.
Tried to post a picture, it would not let me, said I had to have 10 posts first. I actually found a local shop that specializes in treks, the guy there assembled these bikes back in 95. He said that I had everything adjusted adequately, but some of the old Sntour derailleurs are not compatible with the new Shimano index shifters. I bought a Shimano Acera derailleur, should solve the problem. I still have to install it. I was also told that most all the clamp styles 3 speed derailleurs will work as long as tube size is right
Tried to post a picture, it would not let me, said I had to have 10 posts first. I actually found a local shop that specializes in treks, the guy there assembled these bikes back in 95. He said that I had everything adjusted adequately, but some of the old Sntour derailleurs are not compatible with the new Shimano index shifters. I bought a Shimano Acera derailleur, should solve the problem. I still have to install it. I was also told that most all the clamp styles 3 speed derailleurs will work as long as tube size is right
#6
Bianchi Goddess
Join Date: Apr 2009
Location: Shady Pines Retirement Fort Wayne, In
Posts: 28,132
Bikes: Too many to list here check my signature.
Liked 3,272 Times
in
1,651 Posts
This bike?
__________________
One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
#7
Senior Member
Check out the thread dedicated to 90s Multitracks in the Hybrid forum if you haven’t, lots of enthusiasm for them over there.
#8
Happy banana slug
Join Date: Sep 2015
Location: Arcata, California, U.S., North America, Earth, Saggitarius Arm, Milky Way
Posts: 3,947
Bikes: 1984 Araya MB 261, 1992 Specialized Rockhopper Sport, 1993 Hard Rock Ultra, 1994 Trek Multitrack 750, 1995 Trek Singletrack 930
Liked 1,774 Times
in
1,039 Posts
thanks for your replies.
Tried to post a picture, it would not let me, said I had to have 10 posts first. I actually found a local shop that specializes in treks, the guy there assembled these bikes back in 95. He said that I had everything adjusted adequately, but some of the old Sntour derailleurs are not compatible with the new Shimano index shifters. I bought a Shimano Acera derailleur, should solve the problem. I still have to install it. I was also told that most all the clamp styles 3 speed derailleurs will work as long as tube size is right
Tried to post a picture, it would not let me, said I had to have 10 posts first. I actually found a local shop that specializes in treks, the guy there assembled these bikes back in 95. He said that I had everything adjusted adequately, but some of the old Sntour derailleurs are not compatible with the new Shimano index shifters. I bought a Shimano Acera derailleur, should solve the problem. I still have to install it. I was also told that most all the clamp styles 3 speed derailleurs will work as long as tube size is right
My '94 750 arrived in the mail last week. Out of the box it was a surprisingly comfy ride, barring the flat bars. Currently at the mechanic's, having the wheels trued, prior to stripping it for the powder coater.
Such a pretty paint job.
Likes For Korina:
#10
Senior Member
Shimano Deore RD-M591 is the best 7-8-9 speed deal around. Plenty available. Cheap. Easy peasy. I keep several in my spare parts kit for whatever. They fit almost everything.
Likes For ramzilla:
#11
Senior Member
Oh yeah. They must have made a million of these things. Damn fine stuff.................................
https://www.emkmall.com/products/rea...speed-mountain
https://www.emkmall.com/products/rea...speed-mountain
#12
Participate in some forums, should get your post count up fairly quickly.
My '94 750 arrived in the mail last week. Out of the box it was a surprisingly comfy ride, barring the flat bars. Currently at the mechanic's, having the wheels trued, prior to stripping it for the powder coater.
Such a pretty paint job.
My '94 750 arrived in the mail last week. Out of the box it was a surprisingly comfy ride, barring the flat bars. Currently at the mechanic's, having the wheels trued, prior to stripping it for the powder coater.
Such a pretty paint job.
#13
Happy banana slug
Join Date: Sep 2015
Location: Arcata, California, U.S., North America, Earth, Saggitarius Arm, Milky Way
Posts: 3,947
Bikes: 1984 Araya MB 261, 1992 Specialized Rockhopper Sport, 1993 Hard Rock Ultra, 1994 Trek Multitrack 750, 1995 Trek Singletrack 930
Liked 1,774 Times
in
1,039 Posts
Like I said, the closer you get the worse it looks. There are serious scrapes on the fork and top tube, through to the metal, and it looks like someone scratched their initials on the top tube then covered it (badly) with clear fingernail polish, with lots of other random abuse. The PC has a gorgeous grass green that'll look wonderful with a shiny clear coat.
Edit: Just to clarify, this isn't a resto (sorry guys), this is a make-it-look-gorgeous-and-ride-amazing project. Although I do plan to confuse people by putting period correct decals back on.
Edit: Just to clarify, this isn't a resto (sorry guys), this is a make-it-look-gorgeous-and-ride-amazing project. Although I do plan to confuse people by putting period correct decals back on.
Last edited by Korina; 10-02-19 at 04:47 PM. Reason: Add stuff
#16
Senior Member
__________________
80 Mercian Olympic, 92 DB Overdrive, '07 Rivendell AHH, '16 Clockwork All-Rounder
80 Mercian Olympic, 92 DB Overdrive, '07 Rivendell AHH, '16 Clockwork All-Rounder
Likes For Kobe:
#17
All 7 speed Shimano (3 or 7 speed) MTB or Road dérailleurs should work. My 520 is similar to your 750 and uses a bottom pull 28.6 clamp front dérailleur (M650). I can't guarantee your frame is the same clamp size, but look for Deore LX, DX or XT components. XTR is the highest, but the most expensive.
#18
Senior Member