Do Fenders Actually Protect Components?
#1
Do Fenders Actually Protect Components?
My new bike has fender mounts and I see that I can get an OEM $180 full-coverage fender set. On my current commuter, I just use a snap-on Velox which does a good job of keeping my jacket and shoes dry. The new bike has an electronic groupset and wondering if there's value in full-coverage fenders for protection of the components or just use the trusty snap-ons ?
#2
Thread Killer
Join Date: Aug 2008
Location: Ann Arbor, MI
Posts: 12,804
Bikes: 15 Kinesis Racelight 4S, 76 Motebecane Gran Jubilée, 17 Dedacciai Gladiatore2, 12 Breezer Venturi, 09 Dahon Mariner, 12 Mercier Nano, 95 DeKerf Team SL, 19 Tern Rally, 21 Breezer Doppler Cafe+, 19 T-Lab X3, 91 Serotta CII, 23 3T Strada
Liked 1,931 Times
in
1,162 Posts
I suppose the answer is more to do with your cleaning habits than the fenders, because the components can take getting dirty if they get cleaned and maintained.
That said, I always prefer full coverage fenders because it makes cleaning easier, particularly around the FD and BB.
Other than that, fixed, full coverage fenders look good to me, too, so given the option, I’d definitely say to take the OE fender set over the Velox clip-ons for a commuter rig.
That said, I always prefer full coverage fenders because it makes cleaning easier, particularly around the FD and BB.
Other than that, fixed, full coverage fenders look good to me, too, so given the option, I’d definitely say to take the OE fender set over the Velox clip-ons for a commuter rig.
Likes For chaadster:
#3
Cleaning in winter is a challenge as I don’t have access to the outdoor hose at home. I rely on a self serve car wash which is kind of like a gym. You know you should go but never seem to make the time or effort.
#4
Thread Killer
Join Date: Aug 2008
Location: Ann Arbor, MI
Posts: 12,804
Bikes: 15 Kinesis Racelight 4S, 76 Motebecane Gran Jubilée, 17 Dedacciai Gladiatore2, 12 Breezer Venturi, 09 Dahon Mariner, 12 Mercier Nano, 95 DeKerf Team SL, 19 Tern Rally, 21 Breezer Doppler Cafe+, 19 T-Lab X3, 91 Serotta CII, 23 3T Strada
Liked 1,931 Times
in
1,162 Posts
I do have a garage to work in, and my usual custom in the winter is to keep a hand pressurized garden sprayer out there with a little Salt X concentrate in it which I use to spray down the bikes. I’m usually pretty good at giving frequent, full washes, though; my recently sold Novara commuter made it through 14 Michigan winters and looked and ran great on mostly original components, so I take some pride in that I’m doing something right.
Funny story: I sold that bike for $500 to a guy heading to DC for grad school, and he felt he was getting a great deal. I didn’t have the heart to tell him I paid like $650 14 years earlier! I mean, it was hooked up with everything, from a Garmin Edge 500 to Monkey Lights wheel lights, purple Velocity summer wheels, spare winter wheels/tires…lots of goodies, and it was a cool bike. I do kinda miss it still.
#6
Francophile
Join Date: Nov 2015
Location: Seattle and Reims
Posts: 3,576
Bikes: Peugeot: AO-8 1973, PA-10 1971, PR-10 1973, Sante 1988; Masi Gran Criterium 1975, Stevenson Tourer 1980, Stevenson Criterium 1981, Schwinn Paramount 1972, Rodriguez 2006, Gitane Federal ~1975, Holdsworth Pro, Follis 172 ~1973, Bianchi '62
Liked 680 Times
in
333 Posts
Living in Seattle fenders are a must for a bike that is used all year round.
Edited to add: Mike, 180 bucks seems very high for fenders. You can find good ones for $50 or so, and superb ones for $100. I'd love to know why they would charge such a premium.
Edited to add: Mike, 180 bucks seems very high for fenders. You can find good ones for $50 or so, and superb ones for $100. I'd love to know why they would charge such a premium.
__________________
Keeping Seattle’s bike shops in business since 1978
Keeping Seattle’s bike shops in business since 1978
Last edited by Aubergine; 05-22-24 at 09:12 PM.
#7
Full Member
Works for me. Now I was riding single speed as my commuter but my butt,shirt, and backpack appreciate it.
Oh, and my face. When descending my local hill I would go fast enough the water would splash back into my eyes. Not good. Didn't rain much here, but the fenders were back on in the winter when it did.
Logically a full fender would protect your brake calipers, front derailleur, help protect your crank, and probably rear derailleur too.
Oh, and my face. When descending my local hill I would go fast enough the water would splash back into my eyes. Not good. Didn't rain much here, but the fenders were back on in the winter when it did.
Logically a full fender would protect your brake calipers, front derailleur, help protect your crank, and probably rear derailleur too.
#8
I am potato.
Join Date: Jun 2015
Location: Pacific Northwest
Posts: 3,344
Bikes: Only precision built, custom high performance elitist machines of the highest caliber. 🍆
Liked 1,877 Times
in
1,066 Posts
Fenders do a fantastic job of guiding all the road muck back down to the road. Absolutely it does help with general cleanliness.
I have a wide triangular extension hanging from my front fender that goes nearly to the ground. My feet are 100% shielded from any road derived water. So my feet, shoes, lower pants legs are also kept free of detritus.
Having fenders doesn't excuse you from basic chain maintenance. Nothing does, really. But not getting grit thrown into the front derailleur linkage or into the chain/chainring mesh certainly is the preferable option if given the choice.
I have a wide triangular extension hanging from my front fender that goes nearly to the ground. My feet are 100% shielded from any road derived water. So my feet, shoes, lower pants legs are also kept free of detritus.
Having fenders doesn't excuse you from basic chain maintenance. Nothing does, really. But not getting grit thrown into the front derailleur linkage or into the chain/chainring mesh certainly is the preferable option if given the choice.
__________________
I shouldn't have to "make myself more visible;" Drivers should just stop running people over.
Car dependency is a tax.
I shouldn't have to "make myself more visible;" Drivers should just stop running people over.
Car dependency is a tax.
#9
Grupetto Bob
Join Date: Sep 2020
Location: Seattle-ish
Posts: 6,964
Bikes: Bikey McBike Face
Liked 6,631 Times
in
3,350 Posts
Do they actually protect components? The answer is ‘somewhat’. Certainly better than no fenders but you will inevitably get crud on everything. I used to commute on a full fendered bike rain and shine. Still have one which I take out for occasional spins when it is raining and the fenders do a so-so job. They do a better job of keeping spray and mud off your bum.
__________________
Road 🚴🏾♂️ & Mountain 🚵🏾♂️
Road 🚴🏾♂️ & Mountain 🚵🏾♂️
Likes For rsbob:
#10
Mother Nature's Son
Join Date: Mar 2016
Location: Sussex County, Delaware
Posts: 3,206
Bikes: 2014 Orbea Avant MD30, 2004 Airborne Zeppelin TI, 2003 Lemond Poprad, 2001 Lemond Tourmalet, 2014? Soma Smoothie
Liked 1,569 Times
in
864 Posts
IMO, with the proper fender coverage, they keep a lot of crud off the drive train. That is the main reason I have one bike with fenders, my errands and chores bike. No fenders will keep the bike and body dry in precipitation.
Likes For delbiker1:
#12
You might be surprised at how many people in the touring forum have sworn that fenders keep their feet dry, among other things. If you’re riding in heavy rain and are on the road long enough, your feet are going to get wet even with fenders.
Likes For indyfabz:
#13
Commuter
Join Date: Jun 2022
Location: SE Wisconsin, USA
Posts: 742
Bikes: Main Bikes: 2023 Trek Domane AL3, 2022 Aventon Level.2 eBike, 1972 Schwinn Varsity, 2024 Priority Apollo 11
Liked 519 Times
in
278 Posts
Yes, full coverage fenders are worth it if you will ever ride on a wet road. Even riding on gravel trails they are nice, as the little stones don’t get kicked up and chip away at your paint or get in the chain.
ALLOY fenders worth $100 more? I’m not so sure about that. The main thing is that with full coverage fenders, the rear one comes all the way forward and keeps your seat tube and bottom bracket clean. A nice big front fender will also keep your pants clean. Very few manufacturers make a front fender that actually goes low enough to keep your feet dry or clean; Specialized is one that I can think of who does. Some of us add mudflaps to do this.
hang out in the commuting sub forum for a while and you will see some pictures of guys with nice fender sets with full coverage. They are certainly not using them because they aerodynamic. 😉
Besides dirt and rock chips, full coverage fenders will also keep worms from getting all over your bike after a rain. That’s a pretty nasty one to clean up. Where I live, I would not get a lot of riding in during the early spring, late fall and winter if I didn’t have good full coverage fenders.
ALLOY fenders worth $100 more? I’m not so sure about that. The main thing is that with full coverage fenders, the rear one comes all the way forward and keeps your seat tube and bottom bracket clean. A nice big front fender will also keep your pants clean. Very few manufacturers make a front fender that actually goes low enough to keep your feet dry or clean; Specialized is one that I can think of who does. Some of us add mudflaps to do this.
hang out in the commuting sub forum for a while and you will see some pictures of guys with nice fender sets with full coverage. They are certainly not using them because they aerodynamic. 😉
Besides dirt and rock chips, full coverage fenders will also keep worms from getting all over your bike after a rain. That’s a pretty nasty one to clean up. Where I live, I would not get a lot of riding in during the early spring, late fall and winter if I didn’t have good full coverage fenders.
#14
Thread Killer
Join Date: Aug 2008
Location: Ann Arbor, MI
Posts: 12,804
Bikes: 15 Kinesis Racelight 4S, 76 Motebecane Gran Jubilée, 17 Dedacciai Gladiatore2, 12 Breezer Venturi, 09 Dahon Mariner, 12 Mercier Nano, 95 DeKerf Team SL, 19 Tern Rally, 21 Breezer Doppler Cafe+, 19 T-Lab X3, 91 Serotta CII, 23 3T Strada
Liked 1,931 Times
in
1,162 Posts
So what brand/bike are we talking about here? It might be worth taking a good look at the fenders before shelling out $180. I assume that’s the price installed at the shop, which is nice: good fender installs aren’t necessarily easy.
As an aside, I had fun getting vinyl wrapping on the fenders on the Breezer and love the result:
#15
Banned
I agree that full fenders will do a better job than clip-ons. In OP's case, I wouldn't bother shopping around, just go with the OEM (assuming they are actually OEM). Especially if they'll install them. Plastic or metal, both have pluses and minuses. May as well go with the shop's advice. Looking forward to the grand reveal, hope we aren't disappointed.
#16
Thread Killer
Join Date: Aug 2008
Location: Ann Arbor, MI
Posts: 12,804
Bikes: 15 Kinesis Racelight 4S, 76 Motebecane Gran Jubilée, 17 Dedacciai Gladiatore2, 12 Breezer Venturi, 09 Dahon Mariner, 12 Mercier Nano, 95 DeKerf Team SL, 19 Tern Rally, 21 Breezer Doppler Cafe+, 19 T-Lab X3, 91 Serotta CII, 23 3T Strada
Liked 1,931 Times
in
1,162 Posts
For reference (and fun!), here’s my Tern Rally with its OE fenders. Although OE, they’re really just basic fenders, and offer none of the advantages of the Breezer’s OE fenders.
Namely, the Tern’s have individual stays per side, necessitating extra hardware (nuts, bolts) which is far less than ideal from the standpoint of reliability and maintenance, and are aesthetically detrimental, IMO. The clean, oversized monostays on the Breezer, fixed with a neat, brass fitting bolted to the inside of the fender, is a much more elegant execution.
Namely, the Tern’s have individual stays per side, necessitating extra hardware (nuts, bolts) which is far less than ideal from the standpoint of reliability and maintenance, and are aesthetically detrimental, IMO. The clean, oversized monostays on the Breezer, fixed with a neat, brass fitting bolted to the inside of the fender, is a much more elegant execution.
#17
Senior Member
Fenders won’t miraculously keep you dry in a heavy rain, but they’re sure helpful for riding on wet roads after the rain. Neither aluminum or plastic should rattle, provided they’re installed well, which can be a pretty involved process.
Likes For bboy314:
#18
Commuter
Join Date: Jun 2022
Location: SE Wisconsin, USA
Posts: 742
Bikes: Main Bikes: 2023 Trek Domane AL3, 2022 Aventon Level.2 eBike, 1972 Schwinn Varsity, 2024 Priority Apollo 11
Liked 519 Times
in
278 Posts
Replying now to the thread title, yes, fenders can extend the life of your components.
My earlier example of riding on crushed limestone is a good one I think. If the limestone is just a little damp, it sticks to the tires enough to be kicked up into the chain and sprockets. Little chips of crushed limestone grinding away are not good for chain and brackets.
...on dry weather and dry pavement? Not really.
My earlier example of riding on crushed limestone is a good one I think. If the limestone is just a little damp, it sticks to the tires enough to be kicked up into the chain and sprockets. Little chips of crushed limestone grinding away are not good for chain and brackets.
...on dry weather and dry pavement? Not really.
Last edited by Smaug1; 05-23-24 at 09:27 AM.
#19
Senior Member
Join Date: Oct 2013
Location: Mich
Posts: 7,873
Bikes: RSO E-tire dropper fixie brifter
Liked 3,307 Times
in
2,098 Posts
imo, fenders provided limited protection to the bicycle, but do more at preventing the rider from tire kick up.
If fenders were instrumental to the bicycle's components, the OEM would likely outfitted it out with such protection.
If fenders were instrumental to the bicycle's components, the OEM would likely outfitted it out with such protection.
__________________
-YMMV
-YMMV
Likes For Troul:
#20
The alloy fenders are back ordered until July. I asked about SK fenders that are in stock at slightly lower price. Salesman said OE are with waiting for.
put in the order. Sounds like there’s value over my snap ons. I will ask for the install. Just watched vid and it looks tricky even with the built in mounts.
put in the order. Sounds like there’s value over my snap ons. I will ask for the install. Just watched vid and it looks tricky even with the built in mounts.
#21
Full Member
There are other fenders that are probably just as good but your shop's familiarity with the OEM is probably worth something. Does the $180 include install?
I confess I'm curious who the manufacturer is.
I confess I'm curious who the manufacturer is.
#22
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 16,175
Bikes: Tarmac Disc Comp Di2 - 2020
Liked 5,413 Times
in
3,736 Posts
I never imagined fenders to have a remarkable bearing on whether the bike stayed cleaner or the components lasted for notably longer times. I only thought of them as somewhat protecting the cyclist from the debris thrown up by the tires from the road. Especially that streak of dirt up the back.
If there is any difference for components, I'd think it's a small difference.
If there is any difference for components, I'd think it's a small difference.
#23
Senior Member
Join Date: Oct 2013
Location: Mich
Posts: 7,873
Bikes: RSO E-tire dropper fixie brifter
Liked 3,307 Times
in
2,098 Posts
I never imagined fenders to have a remarkable bearing on whether the bike stayed cleaner or the components lasted for notably longer times. I only thought of them as somewhat protecting the cyclist from the debris thrown up by the tires from the road. Especially that streak of dirt up the back.
If there is any difference for components, I'd think it's a small difference.
If there is any difference for components, I'd think it's a small difference.
__________________
-YMMV
-YMMV
#24
Grupetto Bob
Join Date: Sep 2020
Location: Seattle-ish
Posts: 6,964
Bikes: Bikey McBike Face
Liked 6,631 Times
in
3,350 Posts
I see an occasional cyclist out riding in the rain with the infamous ‘skunk stripe’ going up their bum and back and ask, why? Most folks in this area, due to the amount of rain we receive, do have a fendered bike. I bought this for my MTB but will occasionally put it on one of my unfendered road bikes if the rain is over but the roads are still wet.
I did crash it once while single tracking so did a repair which works fine. Bought it at REI along with a front fork mount partial fender. Good for MTBing in the wet or across creeks and streams but not a real solution for a commuter road bike - just occasional.
I did crash it once while single tracking so did a repair which works fine. Bought it at REI along with a front fork mount partial fender. Good for MTBing in the wet or across creeks and streams but not a real solution for a commuter road bike - just occasional.
__________________
Road 🚴🏾♂️ & Mountain 🚵🏾♂️
Road 🚴🏾♂️ & Mountain 🚵🏾♂️
#25
Commuter
Join Date: Jun 2022
Location: SE Wisconsin, USA
Posts: 742
Bikes: Main Bikes: 2023 Trek Domane AL3, 2022 Aventon Level.2 eBike, 1972 Schwinn Varsity, 2024 Priority Apollo 11
Liked 519 Times
in
278 Posts
Anyway, look at the bikes that are sold as commuters overseas. They ALWAYS seem have fenders. (and chain guards and racks) When a fellow doesn't have the luxury of choosing in which weather he will ride, fenders are a no-brainer.
How about you, Mike? What kind of riding will you do with this bike?
The alloy fenders are back ordered until July. I asked about SK fenders that are in stock at slightly lower price. Salesman said OE are with waiting for.
put in the order. Sounds like there’s value over my snap ons. I will ask for the install. Just watched vid and it looks tricky even with the built in mounts.
put in the order. Sounds like there’s value over my snap ons. I will ask for the install. Just watched vid and it looks tricky even with the built in mounts.
If you asked what the installation charge was, I bet it was less than $20. Heck, my local shops install any accessories I buy from them at no extra charge. (accessories are already marked up enough)