Are You A Spinner Or A Grinder Up Hills?
#1
Henderson, NV
Thread Starter
Join Date: Jan 2022
Location: Henderson/Las Vegas NV
Posts: 537
Bikes: Trek Alpha 3700, GT STS DH, Raleigh Grand Prix, Fisher Montare, Fisher CR-7, Fisher Aquila, Diamondback Sorrento, The Bike Beat Revolution, KHS XC 504R
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 322 Post(s)
Liked 598 Times
in
290 Posts
Are You A Spinner Or A Grinder Up Hills?
Do you stay seated and spin when climbing or you more of a stand and grind kind of rider?
I've always had great leg strength and I've always been more of a grinder. On my ride routes, mostly flats, rolling hills with a few steeper climbs, I feel better standing and grinding a big gear over sitting and spinning. This is using vintage mountain or road bikes and old school toe clips, cinched tight, pushing and pulling each stroke.
If a longer climb I will shift to a smaller gear as needed but normally try to grind it out and recover after getting over the peak.
I've always had great leg strength and I've always been more of a grinder. On my ride routes, mostly flats, rolling hills with a few steeper climbs, I feel better standing and grinding a big gear over sitting and spinning. This is using vintage mountain or road bikes and old school toe clips, cinched tight, pushing and pulling each stroke.
If a longer climb I will shift to a smaller gear as needed but normally try to grind it out and recover after getting over the peak.
Likes For Desert Ryder:
#2
Grupetto Bob
Join Date: Sep 2020
Location: Seattle-ish
Posts: 6,261
Bikes: Bikey McBike Face
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 2604 Post(s)
Liked 5,705 Times
in
2,944 Posts
Reformed grinder and now a spinner, except on short punchy climbs, where I am out of the saddle. And/or on long climbs, I stand occasionally to break up the spinning.
__________________
Road 🚴🏾♂️ & Mountain 🚵🏾♂️
Road 🚴🏾♂️ & Mountain 🚵🏾♂️
Last edited by rsbob; 03-08-24 at 10:48 AM. Reason: Extraneous un-needed ‘it’
Likes For rsbob:
#3
climber has-been
Join Date: Dec 2004
Location: Palo Alto, CA
Posts: 7,159
Bikes: Scott Addict R1, Felt Z1
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 3474 Post(s)
Liked 3,610 Times
in
1,812 Posts
Likes For terrymorse:
#4
Thread Killer
Join Date: Aug 2008
Location: Ann Arbor, MI
Posts: 12,470
Bikes: 15 Kinesis Racelight 4S, 76 Motebecane Gran Jubilée, 17 Dedacciai Gladiatore2, 12 Breezer Venturi, 09 Dahon Mariner, 12 Mercier Nano, 95 DeKerf Team SL, 19 Tern Rally, 21 Breezer Doppler Cafe+, 19 T-Lab X3, 91 Serotta CII, 23 3T Strada
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 3167 Post(s)
Liked 1,724 Times
in
1,042 Posts
Standing/seated and grinding/spinning are not interchangeable. Grinding or spinning is just about pedaling speed, and it’s possible tp pedal at different speeds when either sitting or standing.
That said, as a heavyweight cyclist, I’m almost always seated for climbs, and because I run out of gearing very quickly on slopes, I’d have to say I’m also a grinder, although if I have the power to keep cadence up, I do, so I’m a grinder out of necessity rather than desire.
Climbs send me into the red zone on both HR and power very easily and without any competitive return in speed , so I need to manage output carefully, and being seated and pedaling slower both can help in that tegard.
That said, as a heavyweight cyclist, I’m almost always seated for climbs, and because I run out of gearing very quickly on slopes, I’d have to say I’m also a grinder, although if I have the power to keep cadence up, I do, so I’m a grinder out of necessity rather than desire.
Climbs send me into the red zone on both HR and power very easily and without any competitive return in speed , so I need to manage output carefully, and being seated and pedaling slower both can help in that tegard.
Likes For chaadster:
#5
The Wheezing Geezer
Join Date: Oct 2021
Location: Española, NM
Posts: 1,068
Bikes: 1976 Fredo Speciale, Rivendell Clem Smith Jr., Libertas mixte
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 414 Post(s)
Liked 942 Times
in
453 Posts
Having ridden up the back side of Gates Pass in a 52/15, sitting down, I was a magnificent grinder in my youth.
Now I'm a would-be spinner, and a wheezer, too.
Now I'm a would-be spinner, and a wheezer, too.
Likes For Fredo76:
Likes For Mtracer:
#7
Newbie
Having enough gear options AND not having strong enough legs, I'm a total spinner.
Also there are less risks of injury when spinning than forcing too much on the pedals ("too much" depends on each person).
Also there are less risks of injury when spinning than forcing too much on the pedals ("too much" depends on each person).
Likes For samonzeweb:
#8
Senior Member
Join Date: Oct 2010
Posts: 8,530
Mentioned: 69 Post(s)
Tagged: 0 Thread(s)
Quoted: 3244 Post(s)
Liked 2,523 Times
in
1,516 Posts
Likes For seypat:
#9
Senior Member
Join Date: Jan 2023
Location: Eastern Shore MD
Posts: 902
Bikes: Lemond Zurich/Trek ALR/Giant TCX/Sette CX1
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 576 Post(s)
Liked 800 Times
in
415 Posts
Grinder.
Ex power lifter, so I have the leg strength. All of my pedal power comes in at lower heart rates and lower cadence levels - I have a lower max heart rate than many, spinning at high power for long durations cause me to blow up.
Ex power lifter, so I have the leg strength. All of my pedal power comes in at lower heart rates and lower cadence levels - I have a lower max heart rate than many, spinning at high power for long durations cause me to blow up.
Likes For Jughed:
#10
Senior Member
Join Date: Jan 2009
Location: Colorado Springs, CO
Posts: 5,978
Bikes: 2015 Charge Plug, 2007 Dahon Boardwalk, 1997 Nishiki Blazer, 1984 Nishiki International, 2006 Felt F65, 1989 Dahon Getaway V
Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 1364 Post(s)
Liked 1,684 Times
in
829 Posts
At 62, I spin more than I used to, but I still enjoy getting out of the saddle and hustling a bike up a steep hill...just not as often.
Likes For BobbyG:
#13
I don't know.
Join Date: May 2003
Location: South Meriden, CT
Posts: 2,025
Bikes: '90 B'stone RB-1, '92 B'stone RB-2, '89 SuperGo Access Comp, '03 Access 69er, '23 Trek 520, '14 Ritchey Road Logic, '09 Kestrel Evoke, '08 Windsor Tourist, '17 Surly Wednesday, '89 Centurion Accordo, '15 CruX, '17 Ridley X-Night, '89 Marinoni
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 321 Post(s)
Liked 860 Times
in
450 Posts
my lower spine prefers I stand as much as possible and spin. Grinding out climbs seated hurts my herniated L2, L3, though racing cyclocross since 2015 has given me more seated capabilities.
Likes For RB1-luvr:
#14
Senior Member
Join Date: Mar 2023
Location: NorCal
Posts: 535
Bikes: Santa Cruz Blur 4 TR, Canyon Endurace cf sl, Canyon Ultimate cf slx, Canyon Strive enduro, Canyon Grizl sl8
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 230 Post(s)
Liked 918 Times
in
365 Posts
Mostly a spinner, unless the gradient is too steep to spin. I do alternate between sitting and standing, but I'd hardly call my standing grinding...My standing cadence is typically 75-80 rpm, which is fast for standing IMO. Sitting is 90-100rpm. I rely on my current cardio fitness to keep the heart rate down on such efforts.
#16
Full Member
Is seating at 50-60 rpm still considered spinning? Relative, I guess. Seated normally, but I do stand occasionally to stretch or when it really gets hard.
#17
Senior Member
After suffering from knee pains for a couple of years, I became a spinner.
That doesn't mean I don't grind sometimes, mainly when I don't have a lower gear available or when I'm standing.
I only really stand to relieve my bottom after long hours, when I want to go really fast on a short climb, sprint to catch up a friend, or accelerate swiftly.
That doesn't mean I don't grind sometimes, mainly when I don't have a lower gear available or when I'm standing.
I only really stand to relieve my bottom after long hours, when I want to go really fast on a short climb, sprint to catch up a friend, or accelerate swiftly.
Likes For Amt0571:
#18
Senior Member
Join Date: Oct 2010
Posts: 8,530
Mentioned: 69 Post(s)
Tagged: 0 Thread(s)
Quoted: 3244 Post(s)
Liked 2,523 Times
in
1,516 Posts
It seems like there is a general rule about weight/height ratio which determines whether you should sit/spin or stand/grind. Something like over 2lbs/inch you should sit and spin.
#21
Senior Member
Join Date: May 2017
Location: Hacienda Hgts
Posts: 2,115
Bikes: 1999 Schwinn Peloton Ultegra 10, Kestrel RT-1000 Ultegra, Trek Marlin 6 Deore 29'er
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 824 Post(s)
Liked 1,966 Times
in
948 Posts
Primarily slow spin in the 80 rpm range but will frequently stand for about 20-40 pedals to work different muscles and give my behind a break.
Much depends on the steepness of the grade and length.
If in the 10%+ range, I will mostly sit and spin out of fear of blowing up before peaking.
My road bikes are 34:34 and 30;27 low gear ranges and my rigid MTB that I ride on road is a 24:34 so I have very low gearing to spin.
Much depends on the steepness of the grade and length.
If in the 10%+ range, I will mostly sit and spin out of fear of blowing up before peaking.
My road bikes are 34:34 and 30;27 low gear ranges and my rigid MTB that I ride on road is a 24:34 so I have very low gearing to spin.
#22
Thread Killer
Join Date: Aug 2008
Location: Ann Arbor, MI
Posts: 12,470
Bikes: 15 Kinesis Racelight 4S, 76 Motebecane Gran Jubilée, 17 Dedacciai Gladiatore2, 12 Breezer Venturi, 09 Dahon Mariner, 12 Mercier Nano, 95 DeKerf Team SL, 19 Tern Rally, 21 Breezer Doppler Cafe+, 19 T-Lab X3, 91 Serotta CII, 23 3T Strada
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 3167 Post(s)
Liked 1,724 Times
in
1,042 Posts
#23
Senior Member
Join Date: Mar 2012
Posts: 988
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 510 Post(s)
Likes: 0
Liked 644 Times
in
360 Posts
Or more generally, under 140 lb (10 stone, 65 kg) standing works pretty well. Over 170 lb. (12 stone, 77 kg) you spend too much energy keeping that body weight going up and down. Beyond the numbers, personal preference dominates.
#24
Klaatu..Verata..Necktie?
Join Date: May 2007
Location: SF Bay Area
Posts: 18,042
Bikes: Litespeed Ultimate, Ultegra; Canyon Endurace, 105; Battaglin MAX, Chorus; Bianchi 928 Veloce; Ritchey Road Logic, Dura Ace; Cannondale R500 RX100; Schwinn Circuit, Sante; Lotus Supreme, Dura Ace
Mentioned: 41 Post(s)
Tagged: 0 Thread(s)
Quoted: 10468 Post(s)
Liked 11,968 Times
in
6,128 Posts
Depends on which bike I'm on. My old bikes have slightly better than "period correct" gears for 1980s racing bikes, like 52/42 x 13-26, so with them it's 'sit and grind", whereas my Canyon has 52/36 x 11-34, so with it I sit and spin. I also take it up longer hills than the old bikes. Since I weigh just a bit over 200 lbs, I don't do much out of the saddle climbing, though I'm working on that.
__________________
"Don't take life so serious-it ain't nohow permanent."
"Everybody's gotta be somewhere." - Eccles
"Don't take life so serious-it ain't nohow permanent."
"Everybody's gotta be somewhere." - Eccles
Likes For genejockey:
#25
Senior Member
Join Date: May 2010
Location: Bastrop Texas
Posts: 4,502
Bikes: Univega, Peu P6, Peu PR-10, Ted Williams, Peu UO-8, Peu UO-18 Mixte, Peu Dolomites
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 979 Post(s)
Liked 1,642 Times
in
1,054 Posts
Seat? Who needs a seat?
That was the old days... Ha
Now days my balance is so bad I have to stay in the seat just to stay up. For me its a sitting spinning climb into the hill, transitioning into a slow mash, transitioning into an unsteady dismount...
That was the old days... Ha
Now days my balance is so bad I have to stay in the seat just to stay up. For me its a sitting spinning climb into the hill, transitioning into a slow mash, transitioning into an unsteady dismount...
AND THEN THE WALK OF SHAME!
__________________
No matter where you're at... There you are... Δf:=f(1/2)-f(-1/2)
No matter where you're at... There you are... Δf:=f(1/2)-f(-1/2)
Likes For zandoval: