Noise is Driving Me #&8^!@
#1
For The Fun of It
Thread Starter
Join Date: May 2007
Location: Louisissippi Coast
Posts: 5,852
Bikes: Lynskey GR300, Lynskey Backroad, Litespeed T6, Lynskey MT29, Burley Duet
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 2135 Post(s)
Liked 1,647 Times
in
829 Posts
Noise is Driving Me #&8^!@
I am generally pretty good at figuring noises out. I have one now that has me stumped. Ting, ting, ting with each rotation of the wheel. Increases in frequency with increase in speed. Continues when I stop pedaling. When I dismount and spin both wheels, no noise. When I ride, if I lean my bike to the left it stops. Straight upright and a right lean, and the noise is there. I checked all of the spokes, and they are all tight. I removed the wheels and spun the bearings by hand. Buttery smooth. It's a metallic ting that sounds like a spoke. I looked to make sure the spokes weren't bumping the calipers or any cable ends. No obvious interference.
GAAAHHHH!
GAAAHHHH!
#2
Senior Member
Join Date: Feb 2015
Location: Mission Viejo
Posts: 5,806
Bikes: 1986 Cannondale SR400 (Flat bar commuter), 1988 Cannondale Criterium XTR, 1992 Serotta T-Max, 1995 Trek 970
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 1944 Post(s)
Liked 2,164 Times
in
1,323 Posts
You would happen to have a magnetic sensor bike computer?
John
John
#3
Senior Member
Brake rotor? Seat post?
The later is easy to troubleshoot, stand up while pedaling and listen.
The later is easy to troubleshoot, stand up while pedaling and listen.
#4
Senior Member
Join Date: May 2017
Location: Hacienda Hgts
Posts: 2,109
Bikes: 1999 Schwinn Peloton Ultegra 10, Kestrel RT-1000 Ultegra, Trek Marlin 6 Deore 29'er
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 822 Post(s)
Liked 1,960 Times
in
943 Posts
Micro-fracture of an aluminum rim?
My spokes were fine but I had a fine fracture coming out of one of my nipples.
Made the same tingy noise you described.
My spokes were fine but I had a fine fracture coming out of one of my nipples.
Made the same tingy noise you described.
#5
Senior Member
I had that once. I turned all the spokes 1/8 turn tighter and the noise went away.
#6
Senior Member
Join Date: Aug 2010
Location: Utah
Posts: 8,671
Bikes: Paletti,Pinarello Monviso,Duell Vienna,Giordana XL Super,Lemond Maillot Juane.& custom,PDG Paramount,Fuji Opus III,Davidson Impulse,Pashley Guv'nor,Evans,Fishlips,Y-Foil,Softride, Tetra Pro, CAAD8 Optimo,
Mentioned: 156 Post(s)
Tagged: 0 Thread(s)
Quoted: 2323 Post(s)
Liked 4,988 Times
in
1,776 Posts
Valve stem pinging against the rim?
__________________
Steel is real...and comfy.
Steel is real...and comfy.
#11
Senior Member
Join Date: Oct 2013
Location: Mich
Posts: 7,389
Bikes: RSO E-tire dropper fixie brifter
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Liked 2,971 Times
in
1,918 Posts
Shoe lace strap striking something
__________________
-Oh Hey!
-Oh Hey!
Likes For Troul:
#13
Senior Member
Join Date: Nov 2014
Location: Eugene, Oregon, USA
Posts: 27,547
Mentioned: 217 Post(s)
Tagged: 0 Thread(s)
Quoted: 18376 Post(s)
Liked 4,511 Times
in
3,353 Posts
When was the last time you built/trued the wheel?
Do you unwind your spokes after tightening? It becomes very obvious if you use bladed spokes, but I've heard of people marking the outside of all the spokes with a sharpie before working on the wheel.
Do you unwind your spokes after tightening? It becomes very obvious if you use bladed spokes, but I've heard of people marking the outside of all the spokes with a sharpie before working on the wheel.
#14
Senior Member
Likes For digger:
#16
Guest
Join Date: Sep 2020
Posts: 2,888
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 1346 Post(s)
Liked 3,270 Times
in
1,439 Posts
Try to see if the noise occurs when the seam is at the bottom of the wheel's revolution. Some Mavic rims were known for that; they wouldn't make a sound in the truing stand or workstand, only when ridden. I can't remember if they were pinned or welded.
Likes For Rolla:
#18
Le Crocodile
Join Date: Oct 2005
Location: Santa Barbara Calif.
Posts: 1,873
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 370 Post(s)
Liked 787 Times
in
311 Posts
I have had the "same" issue (sound wise) and it was due to the spoke nipples fretting in the rim eyelets. I just put a tiny drop of oil at each nipple/eyelet union, and it went a way. Sometimes that characteristic sound under load can be due to where the spokes cross (if applicable) and a re-tension was in order.
Because you are describing a "ting" vs. a "click", I would say that the spokes are a very likely culprit.
Because you are describing a "ting" vs. a "click", I would say that the spokes are a very likely culprit.
Likes For Erzulis Boat:
#20
Tragically Ignorant
Join Date: Jun 2018
Location: New England
Posts: 15,613
Bikes: Serotta Atlanta; 1994 Specialized Allez Pro; Giant OCR A1; SOMA Double Cross Disc; 2022 Allez Elite mit der SRAM
Mentioned: 62 Post(s)
Tagged: 0 Thread(s)
Quoted: 8186 Post(s)
Liked 9,098 Times
in
5,054 Posts
Mites.
#21
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 14,987
Bikes: Tarmac Disc Comp Di2 - 2020
Mentioned: 51 Post(s)
Tagged: 0 Thread(s)
Quoted: 6193 Post(s)
Liked 4,809 Times
in
3,317 Posts
If you haven't had your wheels checked by a good wheel person, then do so. Usually doesn't cost very much at all as long as nothing needs replacing. I just take them the wheels leaving the bike at home. Spokes can sometimes make noises from where they cross each other or at the flange or rim. Getting them all tensioned correctly might help. Oil, soap or paraffin around those area might help too for a while.
Have you checked the bolts on your chain rings? I had some get loose. I wouldn't describe it as a ting, but more a click that developed to a creak before I found them as the issue.
Have you checked the bolts on your chain rings? I had some get loose. I wouldn't describe it as a ting, but more a click that developed to a creak before I found them as the issue.
Likes For Iride01:
#22
Over the hill
Join Date: Mar 2006
Location: Los Angeles, CA
Posts: 24,376
Bikes: Giant Defy, Giant Revolt
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 998 Post(s)
Liked 1,206 Times
in
692 Posts
If you haven't had your wheels checked by a good wheel person, then do so. Usually doesn't cost very much at all as long as nothing needs replacing. I just take them the wheels leaving the bike at home. Spokes can sometimes make noises from where they cross each other or at the flange or rim. Getting them all tensioned correctly might help. Oil, soap or paraffin around those area might help too for a while.
__________________
It's like riding a bicycle
It's like riding a bicycle
Likes For urbanknight:
#23
Senior Member
Join Date: Jan 2005
Location: Baltimore, MD
Posts: 5,373
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 2482 Post(s)
Liked 2,955 Times
in
1,678 Posts
If the noise has shown up coincidentally with your riding on the first few truly warm and humid days this year in your area, I'd look for aluminum-on-aluminum "twinning," a term I learned from a materials engineer, if only to eliminate that possibility. Creaking comes and goes when it turns warm and humid around here with my aluminum handlebars and aluminum stems on various of my bikes.
#24
Junior Member
Likes For hayden52:
#25
For The Fun of It
Thread Starter
Join Date: May 2007
Location: Louisissippi Coast
Posts: 5,852
Bikes: Lynskey GR300, Lynskey Backroad, Litespeed T6, Lynskey MT29, Burley Duet
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 2135 Post(s)
Liked 1,647 Times
in
829 Posts
These are essentially new wheels. They have about 400 miles on them. I bought them from Velomine.