Go Back  Bike Forums > Bike Forums > Fifty Plus (50+)
Reload this Page >

helmet miror

Search
Notices
Fifty Plus (50+) Share the victories, challenges, successes and special concerns of bicyclists 50 and older. Especially useful for those entering or reentering bicycling.

helmet miror

Thread Tools
 
Search this Thread
 
Old 05-09-15, 07:42 AM
  #1  
dr1445
Senior Member
Thread Starter
 
Join Date: Nov 2009
Location: Broad Brook CT
Posts: 549

Bikes: jamis 2002 komodo, univega aplina uno, miele toscana 300, 1972 puch brigadier, Marin Sausalito

Likes: 0
Liked 17 Times in 12 Posts
helmet miror

last fall i picked a fluid trainer from craigs list that came with a drop bar1986 bianchi strada. i got the bike up and running for street use. i have been on flat bars for some years, but found i can now use the drop bars once more, bianchi magic i reckon. on the flat bar bikes i use bar end mirrors but that will not work with drop bars because i have friction shifters sticking out the end of the bars. what is a good setup for a helmet mount mirror?
dr1445 is offline  
Old 05-09-15, 07:44 AM
  #2  
spdracr39
Senior Member
 
spdracr39's Avatar
 
Join Date: Feb 2014
Location: Cabot, Arkansas
Posts: 1,538

Bikes: Lynskey Twisted Helix Di2 Ti, 1987 Orbea steel single speed/fixie, Orbea Avant M30, Trek Fuel EX9.8 29, Trek Madone 5 series, Specialized Epic Carbon Comp 29er, Trek 7.1F

Likes: 0
Liked 1 Time in 1 Post
I actually have a drop bar bar end mirror. It inserts where the bar plug goes and works fine. I just don't care for helmet mirrors personally.
spdracr39 is offline  
Old 05-09-15, 07:58 AM
  #3  
dr1445
Senior Member
Thread Starter
 
Join Date: Nov 2009
Location: Broad Brook CT
Posts: 549

Bikes: jamis 2002 komodo, univega aplina uno, miele toscana 300, 1972 puch brigadier, Marin Sausalito

Likes: 0
Liked 17 Times in 12 Posts
i have thumb type friction shifters hanging from the bar ends, so bar end mirrors would get in the way of shift operations. the bike came with downtube shifters that i did not enjoy and i had a set of friction shifters in stock, which work just fine.
dr1445 is offline  
Old 05-09-15, 01:14 PM
  #4  
BobbyG
Senior Member
 
BobbyG's Avatar
 
Join Date: Jan 2009
Location: Colorado Springs, CO
Posts: 6,003

Bikes: 2015 Charge Plug, 2007 Dahon Boardwalk, 1997 Nishiki Blazer, 1984 Nishiki International, 2006 Felt F65, 1989 Dahon Getaway V

Liked 1,702 Times in 840 Posts
Been wearing glasses since I was 4. Been using glasses mounted take-a-look mirror for 10 or 12 years. I like it better than handle-bar mounted mirrors. Never tried a helmet mounted mirror, but you might consider the take-a-look glasses mounted mirror. And if you don't wear glasses, consider wearing glasses-style safety glasses and put the take-a-look on them. But they do make handle-bar mount mirrors that clamp or velcro to the bar, and I've seen some that clamp to the brake lever on drop-bars...plenty of options. But even though I haven't used a helmet mount, I'd say I'd prefer that to handlebar mounted mirrors for the helmet-mounted mirror's ability to sweep the background behind you, like the glasses mounted mirrors do.
BobbyG is offline  
Old 05-09-15, 02:00 PM
  #5  
John_V 
Senior Member
 
John_V's Avatar
 
Join Date: Jun 2011
Location: Tampa, Florida
Posts: 5,585

Bikes: 2017 Colnago C-RS, 2012 Colnago Ace, 2010 Giant Cypress hybrid

Liked 122 Times in 85 Posts
I used a helmet mirror and really liked it until I started riding with aerobars. On road bikes, when you change your body angle from riding on the hoods to riding on the drops or on aerobars, helmet and eyeglass mounted mirrors become useless. A while back, I remember seeing a bar end mirror with a pass through for bar end shifters, but I can't remember who makes it or where I saw it.
__________________
HCFR Cycling Team
Ride Safe ... Ride Hard ... Ride Daily

2017 Colnago C-RS
2012 Colnago Ace
2010 Giant Cypress
John_V is offline  
Old 05-09-15, 03:07 PM
  #6  
Cychologist
Getting older and slower!
 
Cychologist's Avatar
 
Join Date: Feb 2008
Location: Bowling Green, Kentucky
Posts: 419

Bikes: Trek Domane 6 series Project One, Bike Friday Pocket Rocket, Trek XO1, Specialized Turbo Vado 6.0

Liked 2 Times in 1 Post
I don't ride with a mirror, but most of the people I ride with swear by these.

https://flcycling.org/store/helmet-mirror/
Cychologist is offline  
Old 05-09-15, 03:48 PM
  #7  
dr1445
Senior Member
Thread Starter
 
Join Date: Nov 2009
Location: Broad Brook CT
Posts: 549

Bikes: jamis 2002 komodo, univega aplina uno, miele toscana 300, 1972 puch brigadier, Marin Sausalito

Likes: 0
Liked 17 Times in 12 Posts
there is only a few places where a mirror would come into play, those are where i cross traffic lanes. at 70 the old neck doesn’t pivot so much anymore, so even if i had to sit up to use the mirror momentarily that would be ok. i think i will give the" take a look" a try. thanks
dr1445 is offline  
Old 05-09-15, 03:54 PM
  #8  
JanMM
rebmeM roineS
 
JanMM's Avatar
 
Join Date: Jan 2006
Location: Metro Indy, IN
Posts: 16,217

Bikes: Bacchetta Giro A20, RANS V-Rex, RANS Screamer

Liked 348 Times in 227 Posts
I've been using a Take A Look mirror mounted to the visor of my helmet for several (?) years and it works best of any of the helmet- or glasses-mounted mirrors I've used since about 1980.
Just about impossible to turn around to look behind me on the recumbent bikes that I ride, so a mirror is mandatory, not an option.
__________________
Bacchetta Giro A20, RANS V-Rex, RANS Screamer

Last edited by JanMM; 05-09-15 at 07:48 PM.
JanMM is offline  
Old 05-09-15, 08:21 PM
  #9  
wnylogo
Senior Member
 
Join Date: Jun 2008
Location: Massachusetts
Posts: 74
Likes: 0
Liked 0 Times in 0 Posts
I use a Third Eye mirror on each of my helmets. What I like is the adjustability of the mirror-- back and forth and side to side. It has a pivoting arm post that I can also raise and lower. When I move from the hoods to the drops it's easy to make quick minor adjustments. Of course if I am in a deep tuck I must raise my head to utilize the mirror.

I just stuck the adhesive backing with the base onto the outside of my helmet, then attached the arm with mirror to the post and reattached my visor. I find I need a little more distance of the mirror from my eye to view the best. Also, it seems to stick the best on that surface.

https://www.amazon.com/Third-Eye-Helm.../dp/B0015ZZBM6
wnylogo is offline  
Old 05-09-15, 10:30 PM
  #10  
GFish
Senior Member
 
GFish's Avatar
 
Join Date: Jun 2011
Location: Oregon
Posts: 649
Likes: 0
Liked 0 Times in 0 Posts
I feel naked without a mirror. Don't like surprises coming from the rear. Even in group rides a mirror helps with tracking other cyclist.

I too use the Take-a-look mirror, have this mounted to sun glasses. Properly setup, small eye movement provides a rearward view. A helmet mirror could do the same, but I have multiple helmets and one pair of glasses.

One bike has a bar end mirror, but it's not that effective. The distance from the eye keeps objects smaller plus it's not as clear that far away. And, I'm always adjusting my position to check out the mirror. I also see people with helmet mounted mirrors shift their head to see the mirror, too, perhaps these are not setup correctly.

Anyway, the take-a-look makes it simple and easy and provides great visibility behind you.

Last edited by GFish; 05-09-15 at 10:36 PM.
GFish is offline  
Old 05-09-15, 10:53 PM
  #11  
79pmooney
Senior Member
 
79pmooney's Avatar
 
Join Date: Oct 2014
Location: Portland, OR
Posts: 13,056

Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder

Liked 4,085 Times in 2,642 Posts
I use the Third Eye with the plastic clamp for the mirror but have never had good experiences using them as intended. I've been making a small fiberglass mount that is bolted to the helmet visor and that has a properly oriented surface for the clamp. Love it. Been using them for most of a decade now. Drawback is that I have to custom make them for each new helmet visor style. I would love to see Third Eye and say Bell/Giro sit down and talk out a standard.

Edit: (After seeing GFish's post.) Yeah I have to move my head. I have to do the same driving. Not a big deal. Plus is that a mirror that close gives you a really wide field of view.

Ben

Last edited by 79pmooney; 05-09-15 at 10:57 PM.
79pmooney is offline  
Old 05-10-15, 05:25 PM
  #12  
1961felt
Junior Member
 
Join Date: May 2015
Location: Beaver Falls PA
Posts: 7

Bikes: Felt Z85

Likes: 0
Liked 0 Times in 0 Posts
Just started to ride again after 25 years and back in the day there were no Electric Hybrid cars on the road . Boy are those things quiet . So I bought a Third Eye helmet mirror and stuck it on the left side of my lid. So now when one of those really quiet autos come up from behind I can at least see them first !
1961felt is offline  
Old 05-10-15, 06:20 PM
  #13  
Biker395 
Seat Sniffer
 
Biker395's Avatar
 
Join Date: Sep 2007
Location: SoCal
Posts: 5,664

Bikes: Serotta Legend Ti; 2006 Schwinn Fastback Pro and 1996 Colnago Decor Super C96; 2003 Univega Alpina 700; 2000 Schwinn Super Sport

Liked 2,119 Times in 596 Posts
Originally Posted by wnylogo
I use a Third Eye mirror on each of my helmets. What I like is the adjustability of the mirror-- back and forth and side to side. It has a pivoting arm post that I can also raise and lower. When I move from the hoods to the drops it's easy to make quick minor adjustments. Of course if I am in a deep tuck I must raise my head to utilize the mirror.

I just stuck the adhesive backing with the base onto the outside of my helmet, then attached the arm with mirror to the post and reattached my visor. I find I need a little more distance of the mirror from my eye to view the best. Also, it seems to stick the best on that surface.

Robot Check

I like the Third Eye mirrors too ... been using them for 25+ years now.

This one is my mirror of choice.

Robot Check

And yes ... mirrors rock. I would not ride without one.
__________________
Proud parent of a happy inner child ...

Biker395 is offline  
Old 05-10-15, 06:31 PM
  #14  
Bill Fold
Senior Member
 
Bill Fold's Avatar
 
Join Date: Oct 2012
Location: Central Florida & Massachusetts
Posts: 106

Bikes: Montague MX, Brompton S6L, Origami Crane, Dahon S1

Likes: 0
Liked 0 Times in 0 Posts
+1 for the Take A Look Eyeglass Mirror. I use mine on my sunglasses.
Bill Fold is offline  
Old 05-12-15, 08:16 PM
  #15  
lenny866
Senior Member
 
Join Date: Nov 2011
Location: Foothills of the beautiful Adirondack Mountains, NY
Posts: 503
Liked 4 Times in 3 Posts
I have used both the helmet and glasses third eye mirror. I prefer the helmet mount, but my new helmet does not ave an ideal place to mount it. So I went to the ones that mount on the glasses. It gets the job done.
lenny866 is offline  
Old 05-13-15, 12:51 PM
  #16  
Ronno6
Senior Member
 
Ronno6's Avatar
 
Join Date: Nov 2010
Location: Deep South
Posts: 1,335

Bikes: Cannondale SR's and ST's from the '80's

Likes: 0
Liked 46 Times in 20 Posts
I have been using the Cycle Aware Reflex Helmet Mounted Mirror for as long as I can remember.
Rear field of view is great when I am on the hoods (I rarely ride the drops.)
The only point of concern is that you need to have a helmet with sufficient flat surface
to stick the mounting base onto the helmet.
With today's vented helmets that is no easy feat.
Ronno6 is offline  
Old 05-13-15, 02:01 PM
  #17  
John E
feros ferio
 
John E's Avatar
 
Join Date: Jul 2000
Location: www.ci.encinitas.ca.us
Posts: 21,860

Bikes: 1959 Capo Modell Campagnolo; 1960 Capo Sieger (2); 1962 Carlton Franco Suisse; 1970 Peugeot UO-8; 1982 Bianchi Campione d'Italia; 1988 Schwinn Project KOM-10;

Liked 1,376 Times in 866 Posts
I have a CycleAware mirror on my Giro helmet. I had to carve a notch in the side of the visor (no big deal), and I had to re-engineer the adhesive system when it wore out (again, pretty simple), but I have been absolutely delighted with it. Like the other mirror evangelists, I now hate to ride w/o a mirror. I even miss it when I am walking or jogging along the road and want to see traffic coming up from behind.
__________________
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
John E is offline  
Old 05-14-15, 09:06 AM
  #18  
Outnumbered
Senior Member
 
Outnumbered's Avatar
 
Join Date: Mar 2015
Location: Cape Cod, MA
Posts: 196

Bikes: Cyclocross Generic Steel Frame 105 Shimano Group Set, Minn Framed Fat Bike

Liked 2 Times in 2 Posts
I use a bar end mirror up here in the NE with the traffic in a tourist area in the afternoon you'd be crazy without one. i tried the helmet mount mirror but didn't care for it. But like anything else with biking it really comes to personnel preference, try a few till you fin done you like.
Outnumbered is offline  
Old 05-22-15, 06:31 PM
  #19  
peter_d
self propelled lifer
 
peter_d's Avatar
 
Join Date: Aug 2007
Location: Manitoba
Posts: 557

Bikes: 1962 Dawes Galaxy; 72 Gitane Interclub;73 Peugeot PR10;78 Torpado Luxe;73 Grandis; 81 Raleigh/Carlton Comp; 85 Bianchi Stelvio; 87 Bianchi Brava; 73 Bottechia Special; 1969 or70 Bob Jackson

Likes: 0
Liked 12 Times in 7 Posts
There's an Australian company that sells a mirror that attaches to your forearm with a strap, I haven't tried one but it seems like a pretty good idea. RearViz - Rearview Bike Mirror - No vibration or distortion
peter_d is offline  
Old 05-22-15, 07:16 PM
  #20  
JohnJ80
Senior Member
 
Join Date: Feb 2011
Location: Minnesota
Posts: 4,673

Bikes: N+1=5

Liked 246 Times in 182 Posts
Originally Posted by Cychologist
I don't ride with a mirror, but most of the people I ride with swear by these.

https://flcycling.org/store/helmet-mirror/
Here's the replacement for that. I think this is the best helmet mirror out there. I have one and have used it.

HubBub Helmet Mirror | HubBub Custom Online

It's a good mirror, but it drives me crazy having a mirror in my line of sight or peripheral vision all the time. I like either the Italian Bike Mirror or the Bike Eye. Both work well. The Italian Bike Mirror looks better and is a little more fiddly to set up. The Bike Eye gives a clearer and larger view.

With ANY mirror, you still need to turn your head and take a solid look if you are turning to cross traffic. The mirror gives you the advantage of only needing to do it after you're pretty sure nothing is there.



J.
JohnJ80 is offline  
Old 05-22-15, 07:24 PM
  #21  
Retro Grouch 
Senior Member
 
Retro Grouch's Avatar
 
Join Date: Feb 2004
Location: St Peters, Missouri
Posts: 30,225

Bikes: Catrike 559 I own some others but they don't get ridden very much.

Liked 644 Times in 365 Posts
Originally Posted by Cychologist
I don't ride with a mirror, but most of the people I ride with swear by these.

https://flcycling.org/store/helmet-mirror/
Mrs. grouch and I both used a Chuck Harris mirror for several years and liked them. Once you get it right it attaches solidly, adjusts easily and then it holds it's adjustment. I'm fairly sure I still have them around here someplace.
__________________
My greatest fear is all of my kids standing around my coffin and talking about "how sensible" dad was.
Retro Grouch is offline  
Old 05-23-15, 09:51 AM
  #22  
fietsbob
Banned
 
Join Date: Jun 2010
Location: NW,Oregon Coast
Posts: 43,598

Bikes: 8

Liked 1,360 Times in 866 Posts
Look at these : EVT | Safe Zone Mirror
fietsbob is offline  
Old 05-23-15, 04:14 PM
  #23  
zonatandem
Senior Member
 
zonatandem's Avatar
 
Join Date: Dec 2003
Location: Tucson, AZ
Posts: 11,016

Bikes: Custom Zona c/f tandem + Scott Plasma single

Likes: 0
Liked 19 Times in 11 Posts
Have utilized a TAKE-A-Look mirror for many years.
Mine mounts on the temple of my eyeglasses and is very adjustable and easy to use.
They last for years; have used 3rd Eye years ago, but the plastic stuff kept breaking and I'd be buying several replacements per year.
TAKE-A-LOOK are handmade in Colorado by disabled folks; no plastic to break or wear out.
The Chuck Harris handmade mirror was also a good choice; unfortunately Chuck died a couple years ago ; he made the mirrors out of recycled stuff including old spokes and bottle caps to hold the glass, etc.
Pedal on!
Rudy/zonatandem

Last edited by zonatandem; 05-23-15 at 04:17 PM. Reason: addition
zonatandem is offline  
Old 05-23-15, 07:41 PM
  #24  
qcpmsame 
Semper Fi
 
Join Date: Jan 2008
Posts: 12,943
Liked 358 Times in 241 Posts
+1 for the Take-a-look mirrors, I have faithfully used mine for 3½ years now.

Bill
__________________
Semper Fi, USMC, 1975-1977

I Can Do All Things Through Him, Who Gives Me Strength. Philippians 4:13


qcpmsame is offline  
Old 05-24-15, 01:00 AM
  #25  
CB HI
Cycle Year Round
 
CB HI's Avatar
 
Join Date: Mar 2005
Location: Honolulu, HI
Posts: 13,644
Liked 92 Times in 59 Posts
A link for take a look mentioned above.
Do you wear glasses when riding? The following works well for me:
Bike Peddler Take A Look Cycling Eyeglass Mirror (Compact) | Amazon.com: Outdoor Recreation
__________________
Land of the Free, Because of the Brave.
CB HI is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
MissDaisy
Touring
21
09-15-14 03:12 PM
the_tool_man
Commuting
77
07-30-12 09:35 AM
Texasplumr
Fifty Plus (50+)
40
06-08-12 12:04 PM
TromboneAl
Fifty Plus (50+)
30
10-09-11 07:23 PM
kjc9640
Fifty Plus (50+)
23
05-02-10 07:31 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Your Privacy Choices -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.