Clean tires matter?
#1
Senior Member
Thread Starter
Join Date: Mar 2020
Location: Nevada County, California
Posts: 803
Bikes: Subject to change at any given moment but currently is...... Colnago Mapei, Colnago C40, Wilier Triestina Carbon, Wilier Triestina Ramato, Follis 472, Peugeot PX60, Razesa, Orbea Terra, Soma Pescadero and 1/2 owner of a Santana tandem.
Liked 791 Times
in
269 Posts
Clean tires matter?
I clean my tires after each ride with a spray on tire cleaner just so they look good. I then started wondering if keeping the grime to a minimum helps maintain their RR rating, grip characteristics, etc….or makes a zip of difference?
And I’m referring to road tires, not a gravel tire carrying a pound of mud.
And I’m referring to road tires, not a gravel tire carrying a pound of mud.
#2
Should Be More Popular
Join Date: Dec 2007
Location: Malvern, PA (20 miles West of Philly)
Posts: 43,303
Bikes: 1986 Alpine (steel road bike), 2009 Ti Habenero, 2013 Specialized Roubaix
Liked 9,204 Times
in
4,264 Posts
Likes For datlas:
#3
Senior Member
I am sure whatever you are cleaning your tires with, it is not improving their performance in any way. Whatever residual chemicals are left on the tire surface from the cleaning would probably reduce friction, not enhance it, but it would quickly wear off the contact patch anyway.
How is it that you are you getting your road tires so dirty that they need cleaning after each ride? I never clean my tires and they are clean enough to roll across the living room carpet. Even if I were to roll thru something dirty, like wet silt, the dirt wears off pretty quickly by just riding the bike.
How is it that you are you getting your road tires so dirty that they need cleaning after each ride? I never clean my tires and they are clean enough to roll across the living room carpet. Even if I were to roll thru something dirty, like wet silt, the dirt wears off pretty quickly by just riding the bike.
Likes For mihlbach:
#4
Senior Member
Join Date: Oct 2013
Location: Mich
Posts: 7,704
Bikes: RSO E-tire dropper fixie brifter
Liked 3,201 Times
in
2,034 Posts
If it's containing chemicals that prevent degradation & protects from UV, it might have a worthwhile impact.
if it's just for a shine, it might increase plopping on hard surfaces.
if it's just for a shine, it might increase plopping on hard surfaces.
__________________
-YMMV
-YMMV
#5
Senior Member
Join Date: Oct 2013
Location: Mich
Posts: 7,704
Bikes: RSO E-tire dropper fixie brifter
Liked 3,201 Times
in
2,034 Posts
I am sure whatever you are cleaning your tires with, it is not improving their performance in any way. Whatever residual chemicals are left on the tire surface from the cleaning would probably reduce friction, not enhance it, but it would quickly wear off the contact patch anyway.
How is it that you are you getting your road tires so dirty that they need cleaning after each ride? I never clean my tires and they are clean enough to roll across the living room carpet. Even if I were to roll thru something dirty, like wet silt, the dirt wears off pretty quickly by just riding the bike.
How is it that you are you getting your road tires so dirty that they need cleaning after each ride? I never clean my tires and they are clean enough to roll across the living room carpet. Even if I were to roll thru something dirty, like wet silt, the dirt wears off pretty quickly by just riding the bike.
30+ miles & it's usually poop.
__________________
-YMMV
-YMMV
Likes For Troul:
#6
Senior Member
Join Date: Jan 2013
Posts: 2,734
Bikes: too many sparkly Italians, some sweet Americans and a couple interesting Japanese
Liked 620 Times
in
427 Posts
I have too many bikes so use Aerospace 303 to clean my tires and prevent dry rot and can not detect any difference in performance with clean tires
#7
Grupetto Bob
Join Date: Sep 2020
Location: Seattle-ish
Posts: 6,579
Bikes: Bikey McBike Face
Liked 6,116 Times
in
3,123 Posts
Excellent product. Have used it on my cars for years. Never thought about it for the bikes but might be worth considering to prevent dry rot.
__________________
Road 🚴🏾♂️ & Mountain 🚵🏾♂️
Road 🚴🏾♂️ & Mountain 🚵🏾♂️
#8
Senior Member
During bad weather I do wipe my tyres down with a damp cloth for a very simple reason. The damp cloth makes the rubber look blacker which means that any little flints embedded in the rubber stand out. I can then get them out before they work their way through and cause a puncture. This tends to be more of a problem in bad weather - I presume the flints get washed down onto the roads by the rain. In my experience it is the major cause of punctures around here so an ounce of prevention is worthwhile.
#9
Senior Member
After every ride, I use a rag to wipe down the riding surface of my tires just to check for any gouges or metal/glass stuck in that might turn into a puncture on the next ride. I doubt anything like 303 would either harm or help the tires in any meaningful way, but since a lot of the high end tires claim miracle compounds, could be some impact.
#10
Standard Member
Join Date: Apr 2009
Location: Brunswick, Maine
Posts: 4,290
Bikes: 1948 P. Barnard & Son, 1962 Rudge Sports, 1963 Freddie Grubb Routier, 1980 Manufrance Hirondelle, 1983 F. Moser Sprint, 1989 Raleigh Technium Pre, 2001 Raleigh M80
Liked 977 Times
in
497 Posts
I use a sponge with hot water and a spot of dish liquid to go over the tires with after a ride. This enables me to be certain that there is nothing that I need to know about. Paying attention to thin, racing tires is important, and this gives me the opportunity to assess every aspect of them. Once, I wiped the tires down and saw a patch of bubbles (slow leak). I generally use 700x23 tires at 200g of weight. If they get me home, safe-and-sound, I give them some T.L.C.
__________________
"In every job that must be done, there is an element of fun. You find the fun, and - SNAP - the job's a game!"
"In every job that must be done, there is an element of fun. You find the fun, and - SNAP - the job's a game!"
#11
Senior Member
Join Date: Oct 2013
Location: Mich
Posts: 7,704
Bikes: RSO E-tire dropper fixie brifter
Liked 3,201 Times
in
2,034 Posts
I've found the products containing graphene reduced sidewall fraying... it's my findings, ymmv.
__________________
-YMMV
-YMMV
#12
Senior Member
Join Date: May 2017
Location: Hacienda Hgts
Posts: 2,142
Bikes: 1999 Schwinn Peloton Ultegra 10, Kestrel RT-1000 Ultegra, Trek Marlin 6 Deore 29'er
Liked 1,987 Times
in
957 Posts
Hmm. I clean the sidewalls with a cleaning wipe because my main bike has reflective strips and I sometimes ride in the early morning before dawn.
#13
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 15,412
Bikes: Tarmac Disc Comp Di2 - 2020
Liked 5,019 Times
in
3,453 Posts
Other than cosmetic looks and perhaps the safety aspect that CAT7RDR mentioned, I doubt that much is being done for the short life the tires will have before the threads are showing or its get to what ever point of wear that you replace them. Perhaps if this is a seldom ridden bike that you take out once a year and the tires can last twenty years or more, perhaps it helps.
As always YMMV, particularly those that have unique conditions for both riding and where they store their bikes.
As always YMMV, particularly those that have unique conditions for both riding and where they store their bikes.
#14
Senior Member
Tire shine products are okay on automobile tire sidewalls. But, I've seen the effects of tire shine on motorcycle tires. Looks nice, until you lean into a turn and the bike goes out from under you.
Personally, I wouldn't use it on a bicycle tire, either. I can hear the EMT's now. "Wow, that was quite the crash you took on that twisty descent there. Don't worry, we'll get you to the ER in no time. By the way, your bike tires look really shiny!"
Personally, I wouldn't use it on a bicycle tire, either. I can hear the EMT's now. "Wow, that was quite the crash you took on that twisty descent there. Don't worry, we'll get you to the ER in no time. By the way, your bike tires look really shiny!"
#15
Senior Member
Join Date: Jul 2008
Location: 25 miles northwest of Boston
Posts: 29,594
Bikes: Bottecchia Sprint, GT Timberline 29r, Marin Muirwoods 29er, Trek FX Alpha 7.0
Liked 3,612 Times
in
2,360 Posts
my car is always more zippy after a carwash
#17
aged to perfection
Join Date: Jun 2009
Location: PacNW
Posts: 1,897
Bikes: Dinucci Allez 2.0, Richard Sachs, Alex Singer, Serotta, Masi GC, Raleigh Pro Mk.1, Hetchins, etc
Liked 1,317 Times
in
698 Posts
I'd be concerned about residual chemicals that might affect tire adhesion, like when leaned over into a curve
/markp
/markp
Likes For mpetry912:
Likes For spelger:
#19
Senior Member
I’ve never heard of people doing this and would imagine spraying them with something would do more harm than good
Likes For LarrySellerz:
#20
Banned
Join Date: Feb 2008
Location: Mississauga/Toronto, Ontario canada
Posts: 8,721
Bikes: I have 3 singlespeed/fixed gear bikes
Liked 2,492 Times
in
1,287 Posts
#21
Senior Member
I have a Park Tool pizza cutter and the more clean it gets, it cuts way faster.
![](https://www.parktool.com/assets/img/product/_productDetail/PZT-2_0009.jpg)
Likes For soyabean:
#23
Senior Member
Join Date: Oct 2014
Location: Portland, OR
Posts: 13,054
Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder
Liked 4,082 Times
in
2,641 Posts
My tires get accidentally rinsed off when I spray muck and dust off after rides. But if the bike looks OK (or the hose faucet is off for the freezing months) I don't bother. Never did this in my racing days or before I bought a house. So apparently I've experienced all the bad that happens with dirty tires. And stayed completely oblivious. (I wonder how many Tours I could have won if I had only cleaned my tires.)
Likes For 79pmooney:
#24
Grupetto Bob
Join Date: Sep 2020
Location: Seattle-ish
Posts: 6,579
Bikes: Bikey McBike Face
Liked 6,116 Times
in
3,123 Posts
I originally got the idea because I used Comet and a brush to clean white wall tires.
__________________
Road 🚴🏾♂️ & Mountain 🚵🏾♂️
Road 🚴🏾♂️ & Mountain 🚵🏾♂️
#25
Senior Member
Are you saying you clean your bike after a 30 mile ride because "it's usually poop"? I suggest you quit riding in cow/sheep/pig pastures. I clean my bike every 350 miles or so, and lots of times the only thing really needed is clean/lube the chain.
Likes For KerryIrons: